您现在的位置:网站首页答辩论文论文翻译机械翻译

PAC——新一代工业控制系统, 可编程自动化控制发展的未来(论文翻译)

  • 简介:(论文翻译 页数:18 字数:9495)随着许多厂商已生产出能结合PC功能和PLC可靠性的可编程自动化控制器(PAC),目前控制系统已逐渐开始采用PAC。本白皮书介绍PAC的起源以及它与PLC和PC的区别,并指出了使用PAC的工业控制未来发展方向。 目录 • PAC将...
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载

(论文翻译 页数:18 字数:9495)随着许多厂商已生产出能结合PC功能和PLC可靠性的可编程自动化控制器(PAC),目前控制系统已逐渐开始采用PAC。本白皮书介绍PAC的起源以及它与PLC和PC的区别,并指出了使用PAC的工业控制未来发展方向。

目录
• PAC将成为未来的工业控制方式
• “80-20” 法则
• 构建更好的控制器
• 两种不同的软件解决方案
• PAC的视觉和测量应用
• PAC免除了对专门硬件的需要
• LabVIEW用于自动化控制
NI PAC系统
PAC将成为未来的工业控制方式和基于PC控制系统相比,有关PLC(可编程逻辑控制器)优势和劣势的激烈争论已经持续了十年。由于PC和PLC在技术上的差别越来越小,并且随着PLC采用了商业化(COTS)硬件以及PC能采用实时操作系统,从而出现了一种新类型的控制器——PAC。PAC的概念是由自动化研究机构 (ARC) 提出的,它表示可编程自动化控制器,用于描述结合了PLC和PC功能的新一代工业控制器。传统的PLC厂商使用PAC的概念来描述他们的高端系统,而PC控制厂商则用来描述他们的工业化控制平台。
“80-20” 法则
在PLC被开发出来的三十年里,它经过不断地发展,已经能结合模拟I/O,网络通信以及采用新的编程标准如IEC 61131-3。然而,工程师们只需利用数字I/O和少量的模拟I/O数以及简单的编程技巧就可开发出80%的工业应用 。来自ARC、联合开发公司(VDC)以及网上PLC培训资源PLC.net的专家估计:
• 77%的PLC被用于小型应用(低于128 I/O)
• 72%的PLC I/O是数字的
• 80%的PLC应用可利用20条的梯形逻辑指令集来解决
由于采用传统的工具可以解决80%的工业应用,这样就强烈地需要有低成本简单的PLC;从而促进了低成本微型PLC的增长,它带有用梯形逻辑编程的数字I/O。然而,这也在控制技术上造成了不连续性,一方面80%的应用需要使用简单的低成本控制器,而另一方面其它的20%应用则超出了传统控制系统所能提供的功能。工程师在开发这些20%的应用需要有更高的循环速率,高级控制算法,更多模拟功能以及能更好地和企业网络集成。

 

Downloading more PAC technical paper and
video frequency course

Has produced along with many merchants can unify the PC function and the PLC reliable programmable automation controller (PAC), at present the control system gradually started to use PAC. This white paper introduced PAC the origin as well as it with PLC and the PC difference, and had pointed out will use PAC the industry to control the future development direction.

Table of contents
PAC will become the future the industry control mode
"80-20" principle
Constructs a better controller
Two kind of different softwares solution
PAC vision and survey application
PAC has avoided to the special hardware need
LabVIEW uses in the automated control
NI PAC system
PAC will become the future the industry control mode with compares based on the PC control system, related PLC (programmable logical controller) the superiority and the inferiority intense argument has already continued for ten years. Because PC and PLC are more and more small in the technical difference, and has used the commercialization along with PLC (COTS) the hardware as well as PC can use the real-time operating system, thus appeared one kind of new form controller - PAC. The PAC concept is (ARC) proposes by the automation development facility, it expressed the programmable automated controller, used in describing unified PLC and the PC function new generation of industry controller. The traditional PLC merchant uses PAC the concept to describe their high end system, but PC control merchant then uses for to describe their industrialization to control the platform.

查看评论 已有0位网友发表了看法
  • 验证码: