您现在的位置:网站首页答辩论文工学论文电子论文

智能点火控制系统的设计

  • 简介:(毕业论文 字数:9547 页数:21 带程序)【摘要】本设计是一个基于安全和方便考虑的燃气点火控制系统。系统由一片单片机控制,能自动完成点火过程,并通过步进电机完成气阀的控制。系统设有两个按键,用来调节气阀的开度,从而控制火焰的大小。系统中还...
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载

(毕业论文 字数:9547 页数:21  带程序)【摘要】本设计是一个基于安全和方便考虑的燃气点火控制系统。系统由一片单片机控制,能自动完成点火过程,并通过步进电机完成气阀的控制。系统设有两个按键,用来调节气阀的开度,从而控制火焰的大小。系统中还嵌入了能实时检测火焰燃烧情况的检测电路。当火焰熄灭时,系统将自动关闭气阀,防止燃气外泄。当气阀关闭一段时间后,如果单片机仍在工作,系统可以实现重新点火。该设计结构简单,造价成本低,具有较强的安全性和可操作性。

【关键字】单片机,步进电机,按键,检测电路,重新点火

The design of intelligence ignition control system

【Abstract】The design is based on a safe and convenient considering the gas ignition control system. The system controlled by a MCU. Ignition can be done automatically process, and through complete stepper motor control valve. System with two keys used to adjust the valve opening, thus control the size of the flame. System can also embedded real-time detection of the flame detection circuit. When the flame extinguished, System will automatically close the valve to prevent gas leaks. When the valve closed for some time, and if the MCU are still working, the system can achieve re-ignition. The design has a simple structure, a low cost, and a strong safety and operability.

【Keywords】MCU Stepper Motor Key Detection Circuit Re-ignition

目录

1 引言
2 设计方案及系统框图
3 硬件模块
4 软件程序设计
5 设计分析与结论

1引言
随着人民生活水平的提高及环保意识的增强,干净能源的利用率不断增长。燃气的利用越来越广泛,特别是天然气是世界公认的干净能源,它以无污染,价格便宜,使用方便的优势成为了应用广泛的民用燃料和工业燃料。我们都知道燃气相对于其他燃料使用较方便,但是我们在使用中,如果由于各种原因造成了燃气的泄漏,可能会导致严重的安全事故。所以在燃气的使用中,拥有一个比较安全可靠的点火控制系统是非常重要的。


查看评论 已有0位网友发表了看法
  • 验证码: