您现在的位置:网站首页答辩论文工学论文土建水利学

11F高层综合楼设计(土木工程工业与民用建筑专业毕业设计)

  • 简介:摘 要 本建筑为高层综合楼,位于绵竹市中心繁华地段,总建筑面积约为7784.35M2,建筑总高度为46.2M,地面以上十一层,地下一层。其中,1层为营业大厅,2-10层为办公楼,11层会议室、职工活动室,1、2层高3.9M,其余层高3.6M。整个建筑设有一部运行...
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载

      

本建筑为高层综合楼,位于绵竹市中心繁华地段,总建筑面积约为7784.35M2,建筑总高度为46.2M,地面以上十一层,地下一层。其中,1层为营业大厅,2-10层为办公楼,11层会议室、职工活动室,12层高3.9M,其余层高3.6M。整个建筑设有一部运行电梯和两部消防楼梯。

本建筑抗震设防为7度,场地为2类场地。

本设计的内容包括建筑设计和结构设计两部分。

建筑设计阶段进行了总体方案设计、平面设计、立面设计、剖面设计,以及屋面、楼梯及墙体等构造设计,完成了建筑设计说明及有关施工图。

结构设计阶段进行了结构平面布置、估算截面尺寸、荷载计算、框架计算、侧移验算、内力计算、内力组合及构件设计等工作,并完成了结构设计说明及标准层结构平面布置图、框架配筋图、楼梯、基础结构施工图。

本建筑上部结构采用全现浇钢筋混凝土框架结构体系下部采用筏板基础。结构设计中考虑了恒载、楼屋面活载及地震水平作用、风荷载作用,荷载组合考虑以下两种情况:

1、   恒载+活荷载+风荷载

2、   重力荷载+水平地震

竖向荷载作用下,框架结构内力分析采用力矩分配法;

水平地震作用下,按框架计算,在总框架与分柱之间进行水平作用分配,其框架内力按D值法进行分析计算。

本设计框架抗震等级为二级。对框架梁、柱、节点按强剪弱弯、  强柱弱梁、强节点强锚固的原则进行构件配筋设计,并考虑了地震区对配筋的各种构造要求。

 
 
 
Complex Multistory Building Design
Student:Su wenxi
Advisor: Pan jiading
Abstract 
One:This building is the complex multistory building , lie in flourishinglocation of the centre of Mianzhu, the total area of structure is about 7784.35 square meter , Building total highly 46.2 mete-rs, 11 floors layer above ground, under ground have one floor. Among them, ground floor is business hall, 2-10 stories are the office block, the activity and meeting rooms locate in the 11 stori-es,1st and second stories are 3.9 meters high, the others are 3.6 meters high on floor. The whole building consists of a function lift and two parts of fire controlstairs .
Two: It is 7 degrees aseismatic building, the place is the second cla-ss of place . 
Three:The content includes two parts in this originally designs that is architectural design and structure design. Building carry on 
overall conceptual design, planar design, stand surface design, 
the section is designed design phase. Construct designing has fin-ished building specification and relevant construction drawings in and the roofing, stair and wall body, etc.. It carry on structure-s design phases by structures and assign for planes, estimatecross-section size, load calculate, frame calculate, incline move calculate checking computations, internal force calculate, internal 
force make up and components design.  Finish and key bed structure
plane assign and pursue specification, frame mix muscle picture, 
the stair , infrastructure construction drawing structure.
Four: This building of top structure is all adopted the structure system underpart of the cast-in-place reinforced concrete frame adopt the board foundation of the raft. Structure consider permanent yea-rs by design, floor roofing live and, wind load function horizont-al functions earthquake year. Load and make up consider followingtwo kinds of situations: 
1.Constant load + wind load + live load
2.gravity load + horizontal earthquake 
vertically to function of loading in permanent year. Analyse that the moment of adopting distributes the law in structure internal force of the frame ; Horizontalearthquakes under the function, calculate, in general frames divide into post carry on horizontal function assign according to frame. Its internal force analyse that
calculates according to D value law.
Five: It is second to originally 
aseismatic design. It set a roof beam in place about flame, nodes according to cutting weak and curved strongly posts. Strong post weak roof beamses, strong nodes strong anchor carry on member mix muscle design by careless principle, and has considered that requires various kinds of structures which matches the muscle in the seismic area.

 

 

    

    …………………………………………………… 2

第一章             工程概况 ………………………………………  6

第二章             结构选型 ………………………………………  6

第三章             结构布置及构件初估 …………………………  8

第四章             刚度计算   …………………………………… 10

第五章  荷载计算 ……………………………………… 15

恒载计算 …………………………………………15

活载计算 …………………………………………22

风载计算 …………………………………………23

地震计算 ……………………………………… 24

水平荷载作用下侧移变形验算 ……………… 24

第六章  内力计算 ……………………………………… 28

恒载内力计算 …………………………………28

活载内力计算 …………………………………45

风载内力计算 …………………………………56

地震内力计算 …………………………………58

第七章  内力组合 ………………………………………60

第八章  梁柱配筋 ………………………………………65

第九章   整体结构电算……………………………………94

第十章   楼梯计算……………………………………94

第十一章       基础设计…………………………………………97

参考文献 ………………………………………103

附表()…………………………………………105

 

查看评论 已有0位网友发表了看法
  • 验证码: