准平行环面蜗杆提升机(完整一套设计,有说明书:论文,图纸) 滚筒A2.dwg 滚筒端盖A2.dwg 减速器装配图A0.dwg 溅油轮A4.dwg 套筒A4.dwg 蜗杆轴A2.dwg 蜗杆轴端盖(闷)A3.dwg 蜗杆轴端盖(透)A3.dwg 蜗轮A2.dwg 蜗轮轴A2.dwg 蜗轮轴端盖(闷)A2.dwg 蜗轮轴端盖(透)A2.dwg 箱盖A2.dwg 箱座A2.dwg 支架A2.dwg 总装图A1.dwg 翻译.doc 开题报告.doc 目录.doc 摘要.doc 正文.doc 目 录 Abstract approach for the design of circular worm gear reducer . circular worm gear reducer is one of the members in the worm gear reducer family . the approach is based on the mathematical formulations and physical formulation on the generation process and conditions for the type of worm reducer . circular worm gear reducer .then , it is the principles about choose component parts of circular worm gear reducer. After that the circular worm gear reducer is designed abase on the principle. Then, it is checking computations about main component parts.of circular worm gear reducer,this design represent the common process of circular worm gear reducer',it is worth for the design of other kinds of worm gear reducer in design, manufacture and using. There are a lot of fault in the design of circular worm gear reduce. As can be revealed from the literature search , important problem such as: tooth undercutting ; proper design of worm gear blank;computations of worm and lebel gear 。 摘 要 计方法。环面蜗轮蜗杆减速器是蜗轮蜗杆减速器的一种形式.这个方法是以加工 过程和蜗轮减速器的使用条件的数学和物理公式为基础的。 理和理论计算。然后按照设计准则和设计理论设计了环面蜗轮蜗杆减速器。接着 对减速器的部件组成进行了尺寸计算和校核。该设计代表了环面蜗轮蜗杆设计的 一般过程。对其他的蜗轮蜗杆的设计工作也有一定的价值。 比仍有较大差距。国内在设计制造环面蜗轮蜗杆减速器过程中存在着很大程度上 的缺点,正如论文中揭示的那样,重要的问题如:轮齿的根切;蜗杆毛坯的正确 设计;蜗轮蜗杆的校核。 参考文献 |
准平行环面蜗杆提升机(完整一套设计,有说明书:论文,图纸)
- 上一篇:毕业设计 切管机设计
- 下一篇:注射水储罐(完整一套设计,有说明书:论文,图纸)
查看评论
已有0位网友发表了看法