您现在的位置:网站首页答辩论文工学论文机械论文

飞利浦philipshaver剃须刀外形设计及其电池盒塑料零件注射模设计(完整一套设计,有说明书:论文,图纸)

  • 简介:飞利浦philipshaver剃须刀外形设计及其电池盒塑料零件注射模设计(完整一套设计,有说明书:论文,图纸) 装配.dwg 零件.dwg 上模.dwg 下模.dwg 本科生毕业设计(论文)书写规范(草稿).doc 毕业论文.doc 机电工程学院论文扉页12.doc 计算机辅助模...
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载

飞利浦philipshaver剃须刀外形设计及其电池盒塑料零件注射模设计(完整一套设计,有说明书:论文,图纸)

装配.dwg

零件.dwg

上模.dwg

下模.dwg

本科生毕业设计(论文)书写规范(草稿).doc

毕业论文.doc

机电工程学院论文扉页12.doc

计算机辅助模具加工.doc

大学毕业设计任务书.doc

目  录
摘  要 I
Abstract I
第1章 绪  论 1
1.1蓬勃发展的中国模具工业 1
1.2 我国塑料模具工业和技术的主要发展方向 2
1.3  Pro/engineer 2001简介 3
1.4注射成形基本过程 5
1.5注射模的基本结构 6
1.6用Pro/ENGINEER设计塑料模具的典型流程 6
第2章  剃须刀的造型设计 9
2.1剃须刀的选料及其性能 9
2.2电池盒注射成型工艺过程 10
2.3剃须刀电池盒的结构分析 11
2.4 电池盒造型设计过程 11
2.5剃须刀其余零件的设计 16
2.5.1剃须刀尾部的设计 16
2.5.2剃须刀壳体的设计 19
2.5.3剃须刀电动机壳体的设计 20
2.5.4剃须刀头部的设计 20
第3章 注射机的选择 23
3.1 注射机规格 23
3.2 注射机的校核 23
3.2.1 注射机注射容量校核 23
3.2.2 注射机锁模力校核 24
3.2.3 注射机注射压力校核 24
3.2.4 注射机模具厚度校核 25
3.2.5 注射机最大开模行程校核 25
第4章   成型零件与浇注系统的设计 26
4.1凹、凸模成型零件的设计 26
4.1.1加载参照模型 26
4.1.2成型零件设计 27
4.2浇注系统设计 30
4.2.1 主浇道的设计 30
4.2.2分浇道的设计 30
4.2.3 浇口及冷料穴设计 31
4.2.4铸模和开模 33
4. 3 冷却系统设计 34
4.3.1 凹、凸模冷却系统设计 34
第5章 模具零件设计 36
5.1 推出系统设计 36
5.2 确定模架 37
5.3 模架各装配零件设计 37
5.3.1 导向零件设计 37
5.3.2 浇注系统零件设计 39
5.3.3 推出机构零件 40
5.3.4定位圈 40
5.3.5 其他零件 41
第6章  模具的装配和调试 43
6.1 模具的装配 43
6.2 模具的调试 44
结束语 49
参考文献 50
附录一  图纸 51
附录二 相关英文资料翻译 56

摘  要
本次毕业设计的目的是熟悉并掌握模具成型原理、模架结构以及模具开发流程,

学习运用软件Pro/Engineer2001进行塑料产品的造型及产品模具开发。本次设计

的任务是造型一款飞利浦剃须刀,并对其中的一个零件“电池盒”进行模具开发


在这次毕业设计中,首先学习了我国塑料模具的现状和发展状况、注射模的基本

结构和注射模成型工艺过程以及模具设计的基本原理。接着通过运用三维实体造

型软件Pro/Engineer 对剃须刀进行了3D造型,先是对每个零件造型,然后把零

件装配起来。最后对其中一个零件“电池盒”进行了一模四穴的设计开发,其中

包括凸、凹模的设计、模架的选择、注射机的选择与校核、浇注系统的设计、冷

却系统的设计、推出机构的设计、复位机构的设计等各项工作。此外,还就塑件

的缺陷及其消除措施进行了简单的讨论。

关键词:剃须刀  电池盒   塑料注射模具   一模四穴  注射机  ABS
 
Abstract
The purpose of this design is to be familiar with and know well about
the theory of mold moulding, the mold framework and the flow of mold

developing as well as learning soferware proe2001 in order to sculpt

plastic product and develop plastic mold. The task of the design is

sculpting a philip shaver and develop a mold on  part “battery case”

containd in the shaver.
During the design, firstly the paper learning the actuality and the

future on plastic mold in our country , the basic structure on

injection mold and the technological process on the molding of

injection mold. Secondly, a shaver which is assembled after every part

having been established  is sculpted by using  software

Pro/Engineer2001. Lastly, we develop a mold with four cavities on part

“battery case”.The work include designing the female mold and the

male mold 、the molding systerm 、the cooling systerm 、the detrusion

machine 、the replacement machine and the  selection of the die sets

as well as the Selection and the checkage of the injection machine.

Besides,the paper also discuss the limitation of the product and the

measure of wiping off the limitation.

Keywords: shaver;battery case: plasctic  injection moulding;

injection machine; a mold with four cavities ;acrylonitritle-

butadiene-styrene;
\


查看评论 已有0位网友发表了看法
  • 验证码: