您现在的位置:网站首页答辩论文工学论文机械论文

餐盒模具计算机辅助设计(完整一套设计,有说明书:论文,图纸)

  • 简介:餐盒模具计算机辅助设计(完整一套设计,有说明书:论文,图纸) daozhu A3.dwg dingmo A3.dwg dongmogudingban A3.dwg jiaokoutao A3.dwg mojia A0.dwg tuiban A3.dwg tuigan A3.dwg xingqiang A2.dwg xingxin A2.dwg 模具开发流程 A...
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载

餐盒模具计算机辅助设计(完整一套设计,有说明书:论文,图纸)

daozhu  A3.dwg

dingmo A3.dwg

dongmogudingban  A3.dwg

jiaokoutao  A3.dwg

mojia  A0.dwg

tuiban  A3.dwg

tuigan  A3.dwg

xingqiang   A2.dwg

xingxin  A2.dwg

模具开发流程  A3.dwg

毕业设计.doc

开题报告.doc

论证书.doc

任务书.doc

译文封皮-开题报告封皮.doc

目  录
一     绪 论 - 1 -
1. 设计内容及选材 - 1 -
2.模具制造业的发展状况 - 1 -
3. 传统模具开发与现代模具开发比较 - 4 -
二   餐盘总体设计 - 6 -
1 注射模的基本结构及分类 - 6 -
1.1  注射模的基本结构 - 6 -
1.2  注射模的分类 - 7 -
2 注射模与注射机的关系 - 8 -
2.1  注射模的校核 - 8 -
2.2  锁模力的校核 - 9 -
2.3  最大注射压力的校核 - 10 -
2.4  注射机安装模具部分的尺寸校核 - 10 -
2.5  开模行程的校核 - 11 -
2.6  顶出装置的校核 - 12 -
3 塑料制件在模具中的位置 - 13 -
3.1  型腔数量及排列方式 - 13 -
3.2  分型面的设计 - 13 -
4 浇注系统与排气系统 - 14 -
4.1  普通浇注系统 - 14 -
4.2  模具的排气系统 - 15 -
5 热流道模具的设计 - 16 -
5.1 热流道模具的设计要点 - 16 -
5.2 阀式浇口热流道模具 - 16 -
6  成形零件的设计 - 17 -
6.1 成形零件应具备的性能 - 17 -
6.2 成形零件的结构设计 - 17 -
6.3成形零件的工作尺寸设计  - 18 -
7. 合模导向结构的设计 - 20 -
7.1  导向机构的作用 - 20 -
7.2 导柱导向机构 - 20 -
8. 脱模机构的设计 - 21 -
8.1 脱模机构的机构组成 - 21 -
8.2 简单脱模机构 - 22 -
9. 温度调节系统的设计 - 23 -
10、心得体会 - 25 -
致谢 - 27 -
参考资料 - 28 -

中文摘要:
现代模具与传统模具不同,它不仅形状与结构十分复杂,而且技术要求更高,用传统的模具制造方法显然难于制造,必

须借助于现代化科学技术的发展,采用先进制造技术,才能达到技术要求。当前整个工业生产的发展特点是产品品种多

、更新快、市场竞争激烈。为适应市场对模具制造的短交货期,高精度、低成本的迫切要求,模具将有如下发展趋势。
  愈来愈高的模具精度。10年前,精密模具一般为5μm,现在已达2-3μm,不久1μm精度的模具即将上市。随着零件
微型化及精度要求的提高,有些模具的加工精度要求在1μm以内,这就要求发展超精加工。
  日趋大型化的模具。这一方面是由于用模具成形的零件日渐大型化,另一方面也是由于高生产率要求的一摸多腔(

现在有的已达一摸几百腔)所致。
扩大应用热流道技术。由于采用热流道技术的模具可提高制件的生产效率和质量,并能大幅度节约制件的原材料。因此

,热流道技术的应用在国外发展较快,许多塑料模具厂所生产的模具50%以上采用的热流道技术,甚至80%以上,效果十

分明显。热流道在国内也已用于生产,有些企业使用率达到20%~30%。
关键词 :  模具    热流道

英文摘要:

Mold and traditional mold different, it not only shape and structureextremely complex, moreover

thespecification is higher, makes themethod with the traditional mold obviously difficulty withThe

manufacture, must draw support the modernization scienceand technology development, uses the advanced

manufacture technology,can achieve thespecification. Current entire industrial productionThe development

characteristicis the product variety many,renews, the market competition quickly is intense. In order to

adapt the market the short date of delivery which makes to the mold, highaccuracy, low costThe urgent

need, the mold will have the following developmenttendency
 Increasingly high mold precision. 10 years ago, the precision mold generally is 5 mu m, now has

reached 2-3 mu m, soon 1 precision mold soon
Goes on the market. Along with components microminiaturizationand precision request enhancement, some

molds processing precisionrequest in 1 mu m, this request development superfinishing
Day by day large-scale mold. This on the one hand is because formswith the mold components day after day

large-scale, on the other handalso is because the high productivity wants
Asks as soon as to trace the multi- cavities (the present someto reach as soon as traces several hundred

cavities) to be the resultof. The expansion applies the hot flow channel technology. Becauseuses the hot

flow channel technology the mold to be possible to enhance the workpiece the production efficiency and

the quality, and  can large scale save
Workpiece raw material. Therefore, the hot flow channeltechnology application is quicker in the overseas

development, manyplastics molds factory production mold above 50% uses
Hot flow channel technology, even above 80%, the effect isextremely obvious. The hot flow channel in

domestic has also used into produce, some enterprises utilization ratio achieves 20% ~ 30%
   Keywords:  mold     Hot flow channel

参考资料
[1]彭建声  秦晓刚  编著.  模具技术问答.     机械工业出版社                         
[2] 吴永明 沈建华  赵慧  邓秋军编著.  计算机辅助设计基础 高等教育出版社
[3] 党根茂  骆志斌 李集仁  编著 . 模具设计与制造.  西安电子科技出版社
[4]  夏巨堪  主编.   塑性成形工艺及设备.   机械工业出版社             [5] 康亚鹏  主编. 模具设计基础教程

.  人民邮电出版社
[6] 崔凤奎   主编.  UG V 18操作实例.   机械工业出版社                [7] 李晓武 杨林 朱凯 编著.   从零开

始——UG中文板基础培训教程.  人民邮出版社      
[8] 唐海翔  刘明孝 编译.  UG  注塑模具设计培训教程.  清华大学出版社   [9] 陆劲昆 初利宝  编著.  

Unigraphics  注塑模具设计.  北京大学出版社   [10] 模具实用技术丛书编委会编.  塑料模具设计制造与应用实例.

 机械工业出版社
[11] 贾润礼  程志远 主编 . 实用注塑模设计手册.  中国轻工业出版社

\

\


查看评论 已有0位网友发表了看法
  • 验证码: