您现在的位置:网站首页答辩论文工学论文机械论文

六十度弯管零件热塑料模具的设计及四冲程六缸动画(完整一套设计,有说明书:论文,图纸)

  • 简介:六十度弯管零件热塑料模具的设计及四冲程六缸动画(完整一套设计,有说明书:论文,图纸) 零件打印A4.dwg 上模板A2.dwg 说明书.doc 下模板打印A1.dwg 装配图打印A0.dwg 目录 目录---------------------------------------------------------------...
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载

六十度弯管零件热塑料模具的设计及四冲程六缸动画(完整一套设计,有说明书:论文,图纸)

零件打印A4.dwg

上模板A2.dwg

说明书.doc

下模板打印A1.dwg

装配图打印A0.dwg

目录

目录---------------------------------------------------------------------------------5
第一章 塑料成型概述-------------------------------------------------------6
1.1  塑料及其成型工艺和模具-----------------------------------------6
1.2  塑料成型模具的分类-----------------------------------------------7
1.3  塑料成型模具的发展趋势-----------------------------------------8
1.4  注塑成型的基本过程-----------------------------------------------8
第二章  塑料材料的选择-----------------------------------------------------9
    2.1  一般塑料的组成-----------------------------------------------------8
    2.2  管接头的材料的选择----------------------------------------------9
    2.3  UPVC的性能-------------------------------------------------------10
第三章  塑件结构尺寸及精度----------------------------------------------11
    3.1  尺寸精度-------------------------------------------------------------11
    3.2  脱模斜度-------------------------------------------------------------11
    3.3  厚度-------------------------------------------------------------------11
    3.4  圆角-------------------------------------------------------------------11
    3.5  文字符号和凹凸纹-------------------------------------------------11
第四章  注射机的选择及校核-----------------------------------------------12
    4.1  注射量的校核-------------------------------------------------------14
    4.2  锁模力----------------------------------------------------------------14
    4.3  安装模具高度-------------------------------------------------------14
    4.4  脱模距与模板形成的校核----------------------------------------15
第五章  模架的选择----------------------------------------------------------15
    5.1  注射模的结构------------------------------------------------------15
    5.2  确定模板的尺寸---------------------------------------------------15
第六章  成型零件的设计----------------------------------------------------16
    6.1  分型面的选择-------------------------------------------------------16
    6.2  模侧壁和底板厚度的计算----------------------------------------16
    6.3  凹模的结构设计----------------------------------------------------17
    6.4  型芯的机构设计----------------------------------------------------18
第七章  浇注系统的设计----------------------------------------------------19
7.1  浇口套的选择及主流道的设计----------------------------------19
    7.2  分流道的设计-------------------------------------------------------20
    7.3  浇口的设计----------------------------------------------------------20
第八章  抽心机构和脱模机构的设计--------------------------------------21
第九章  合模导向机构的设计-----------------------------------------------23
第十章  冷却系统的设计----------------------------------------------------24
第十一章  英文翻译----------------------------------------------------------25
鸣谢-------------------------------------------------------------------------------28
参考文献-------------------------------------------------------------------------28

摘要:本模具是注射成型模具。考虑到塑件的实际结构和成型技术要求,采用斜导柱侧向抽芯机构和侧浇口,采用一模二腔来进行成型制造,在保证塑件精度的同时提高生产率,降低了成本。毕业设计论文主要包括两部分内容:第一部分为塑料注射模具的工作原理及有关的应用,有关的设计原则,以及产品的有关介绍。第二部分为模具的设计计算:注塑机的选择,模具的结构设计,浇注系统的设计等等。


关键词:注射模具   脱模  UPVC    塑料模  斜抽芯

UPVCTRACT

With the development of the moulding technology, plastic have assumed an ever increasing role throughout the manufacture and plastics. This is an injection mould for producing “The tube deals with contact”. In order to inject easier when mould, two product would be made in two cavities one time. It’s technology obstacles are the beside-separate organ and it’s inject system.

The design project is divided into two parts. The first part is about the working theory and application of a plastic injection mould, the principle of designing and the introduction of the production about plastic mould. The second part is about the designing and calculation of the mould. It including: the selecting of the injection machine, the structure designing of the plastic mould and the inject system of mould.

Keywords: injection/mould/lid/UPVC/plastic injection mould

参考文献

1. 《塑料模具的设计与制造问答》 王桂萍  邱以云 编  北京:机械工业出版社,1996
2. 《塑料模具设计与制作教程》  陈万林编  王东旭 CD制作  北京:北京希望电子出版社2001.1
3. 《模具设计与制造》  党根茂 骆志斌 李集仁 编  西安电子科技长出版社 2001.3
4. 《注塑成型技术》 王兴天 主编  化学工业出版社2001.4
5. 《模具设计与制造简明手册》 冯炳尧 韩泰荣 蒋文森 编  上海科学技术出版社1999.10
6. 《机械设计》 西北工业大学机械原理及机械零件教研室  编  高等教育出版社 2000.4
7. 《机械零件手册》  周开勤 主编  高等教育出版社 1998.3
8. 《模具制造工艺装备及应用》  模具实用技术丛书编委会  编  北京:机械工业出版社 2000.5

\

\



查看评论 已有0位网友发表了看法
  • 验证码: