您现在的位置:网站首页答辩论文工学论文机械论文

毕业设计 选煤厂用离心式渣浆泵结构设计

  • 简介:毕业设计-选煤厂用离心式渣浆泵结构设计,共47页,16840字,附设计CAD图纸,摘 要,渣浆泵作为离心泵的一种,除了要具有离心泵的一般特征外,还要适应输送介质的多样性。目前,离心式渣浆泵广泛应用于煤炭、矿山、冶金、电力、水利、交通等部
    类型:word+Autocad    页数:47    字数:16840   
    资料包括:论文 图纸   
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载
文件大小:1.66MB
适用专业:机械设计制造及自动化
适用年级:大学
论文编号:197264

论文简介:
毕业设计-选煤厂用离心式渣浆泵结构设计,共47页,16840字,附设计CAD图纸
摘 要
渣浆泵作为离心泵的一种,除了要具有离心泵的一般特征外,还要适应输送介质的多样性。目前,离心式渣浆泵广泛应用于煤炭、矿山、冶金、电力、水利、交通等部门,主要进行精矿、尾矿、灰渣、泥沙等固体物料的水力输送;但由于其工作介质恶劣,造成过流部件的磨损相当严重,其主要破坏形式为过流部件洞穿和变形。过流部件的严重磨损,恶化了泵内流动特性及外特性,缩短了泵的实际使用寿命,降低了生产效率,增大了耗能和设备的投资,进而影响生产的发展。因此,本课题设计的渣浆泵采用多叶片数来减少单个叶片的磨损,适当的增加过流部件的厚度并采用高硬度的耐磨材料来减小磨损,并将叶轮入口的后盖板设计为凸出的、由光滑圆弧组成的轮毂头;采用填料密封来防止高压液体从泵中漏出和防止空气进入泵内,并用背叶片来平衡轴向力。并详细介绍了渣浆泵的总体结构,工作原理和结构设计。
关键词 :渣浆泵;离心泵;结构设计
Abstract
As a centrifugal slurry pump, in addition to the general characteristics of a centrifugal pump, but also to adapt to the diversity of transport medium. Currently, Centrifugal slurry pumps are widely used in coal, mining, metallurgy, electric power, water conservancy, transportation and other sectors, mainly to concentrate, tailings, ash, sediment and other solid materials, water transport; but because of its poor working media, resulting in over-current components of the wear is very serious, the main damage in the form of over-current parts of Insight and deformation. Over-current component of serious wear, deterioration of the pump flow characteristics and external characteristics, reducing the actual life of the pump and reduce the production efficiency, increased energy consumption and equipment investment, thereby affecting production. Therefore, this issue slurry pump design multi-leaf number to reduce the wear of a single leaf, an appropriate increase in the thickness and flow parts Guo Gao hardness of Naimo materials used to wear Jian Xiao, Bing Jiang Yelunrukou of Hou cover design as protruding from the smooth arc composed of the first wheel; using high pressure packing seal to prevent leakage of liquid from the pump and the prevention of air into the pump, and leaves with the back to balance the axial force. Slurry described in detail the overall structure, working principle and structure design.
Key words: Slurry Pump; Centrifugal; Mechanism Design
目 录
摘 要 I
Abstract II
第1章 绪论 1
1.1 选题意义 1
1.2 泵的分类 1
1.3 主要用途及应用领域 1
1.4 国内外发展现状 2
1.4.1 国外发展现状 2
1.4.2 国内发展现状 3
1.5 本文主要研究内容 4
第2章 结构设计与计算 6
2.1 基本参数确定 6
2.2 叶轮的水力设计 6
2.2.1 叶轮主要参数的选择和计算 6
2.2.2 泵吸入口和排出口的确定 14
2.2.3 轴径的初步计算 15
2.3 压水室设计 16
2.4 最小汽蚀余量的确定 18
第3章 轴向力与径向力的平衡 21
3.1 径向力及其平衡 21
3.2 轴向力及其平衡 22
3.3 用背叶片平衡轴向力 23
第4章 渣浆泵主要零部件的强度计算 24
4.1 叶轮强度计算 24
4.1.1 叶轮盖板强度计算 24
4.1.2 轮毂强度计算 25
4.2 泵体的强度计算 26
4.3 泵轴的校核 26
4.3.1 按扭转强度校核 27
4.3.2 校核轴的强度 27
4.3.3 轴的刚度校核 28
4.4 键的校核 28
第5章 渣浆泵通用零部件的选择 30
5.1 选用渣浆泵零部件的重要性 30
5.2 轴封结构的选择 30
5.2.1 常用的填料 31
5.2.2 填料函结构尺寸的确定 31
5.2.3 填料密封安装技术要求 33
5.3 轴承部件的选择 33
5.3.1 滚动轴承的润滑及轴承结构 33
5.3.2 滚动轴承安装时的问题 34
第6章 渣浆泵装配及运转时注意事项 35
6.1 装配时的注意事项 35
6.2 运转时的注意事项 35
6.3 维护和保养 36
结 论 37
致 谢 38
参考文献 39


论文文件预览:
共2文件夹,4个文件,文件总大小:1.66MB,压缩后大小:723.44KB

  • 毕业设计-选煤厂用离心式渣浆泵结构设计
  • 周德辉终稿
  • dwg叶轮.dwg  [216.59KB]
  • dwg总装配图.dwg  [254.39KB]
  • dwg泵体.dwg  [147.62KB]
  • doc说明书.doc  [1.06MB]

查看评论 已有0位网友发表了看法
  • 验证码: