您现在的位置:网站首页答辩论文计算机毕业设计计算机论文

毕业设计 基于ARM系列的嵌入式系统bootloader研究

  • 简介:  毕业设计 基于ARM系列的嵌入式系统bootloader研究,共16页,8172字。
    类型:word   
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载
  毕业设计 基于ARM系列的嵌入式系统bootloader研究,共16页,8172字。
   摘要:在现在日益信息化的社会中,计算机和网络已经全面渗透到日常生活的每一个角落。对于我们每个人,需要的已经不再仅仅是那种放在桌上处理文档,进行工作管理和生产控制的计算机“机器”。各种各样的新型嵌入式系统设备已走进我们生活各方各面。嵌入式系统是把计算机直接嵌入到应用系统中,它融合了计算机软硬件技术,通信技术和半导体微电子技术,嵌入式设备己经越来越多地应用在现代人的工作和生活中,它在当今的应用正变得越来越广泛。BootLoader作为嵌入式系统软件的重要组成部分,对它的研究和实现无疑也具有重要的现实意义。本文首先对嵌入式系统特点和作用进行了介绍,然后从嵌入式系统的角度对如何实现BootLoader进行了的分析,并从通用BootLoader—uboot的启动流程上进行分析BootLoader在嵌入式系统中的启动流程,最后实现了uboot以及ucLinux在ARM7上的移植。
   关键词:嵌入式系统,ARM处理器,BootLoader,uboot
  
   Research and Applications of Intrusion Detection Systems
  
   Abstract: At present, Computer and Network are developing rapidly in the information society, increasingly changing people’s culture lives. Therefore, people need not only processing – document, job – management and production control system but also various new Embedded System.Embeded System directly inserts computer to the application system.It used software and hardware technology,the communication technology as well as semiconductor microelectronic technology. In the morden society, Embeded Ssystem is applied to many fields.So, BootLoader, important part of Embeded system software, has a realistic significance of scientist. This paper introduces the character and function of Embeded System.and then analyzes how to carry out BootLoader according to Embeded System. General bootLoader
   -uboot from the start on the analysis of flow BootLoader Embedded systems in the activation process, and the realization of the ARM7 uboot and ucLinux the transplant.
   Keywords: Embeded System, ARM CPU, Bootloader, uboot
   目 录
  
   1 绪论…………………………………………………………………………………………………1
   1.1 嵌入式系统简介 ………………………………………………………………………………1
   1.2 ARM处理器简介…………………………………………………………………………………2
   2 Bootloader的总体介绍……………………………………………………………………………2
   2.1BootLoader的概念 ……………………………………………………………………………2
   2.2通用BootLoader—uboot的介绍………………………………………………………………4
   2.3BootLoader的主要任务和结构框架(以uboot为例)………………………………………… 5
   3 基于ARM7TDMIuboot和内核的移植 ……………………………………………………………… 7
   3.1 实验准备 …………………………………………………………………………………… 7
   3.2 uboot基于S3C44B0的移植 …………………………………………………………………7
   3.2.1 移植准备 ………………………………………………………………7
   3.2.2 编译生成 ……………………………………………………………7
   3.3 ucLinux基于S3C44B0的移植……………………………………………………………… 8
   3.3.1 ucLinux结构分析……………………………………………………………………8
   3.3.2 移植准备………………………………………………………………………………8
   3.3.3 移植过程………………………………………………………………………………8
   3.4 实验结果…………………………………………………………………………………… 11
   4 总结……………………………………………………………………………………………… 12
   5 致谢……………………………………………………………………………………………… 13
   参考文献………………………………………………………………………………………………13
查看评论 已有0位网友发表了看法
  • 验证码: