您现在的位置:网站首页答辩论文工学论文机械论文

车铣床设计

  • 简介:(论文 字数:11624页数:42)摘要:随着时代的发展,机加工行业已经非常的普及,但是对于大批量的复杂零件加工,还是要用专用机床来进行加工。 本文设计的机床为加工大型油轮舵装置键槽的机床,也可用于大型结构件键槽的加工。舵装置的键槽是内孔键槽,孔...
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载

(论文 字数:11624页数:42)摘要:随着时代的发展,机加工行业已经非常的普及,但是对于大批量的复杂零件加工,还是要用专用机床来进行加工。
本文设计的机床为加工大型油轮舵装置键槽的机床,也可用于大型结构件键槽的加工。舵装置的键槽是内孔键槽,孔为锥孔、盲孔,而且采用双键联接结构,尺寸大,加工精度较高。本文研究了该舵装置键槽的加工工艺以及为加工键槽而设计的专用机床。
本机床是一台专用的车铣床,其床身和总体结构为一台车床,切削功能为铣削,其总原理为将整个铣头和传动轴通过大拖板的运动,伸入孔内,用指状铣刀来铣削加工内孔键槽。通过大拖板的横向运动来实现槽长的加工,通过中拖板和立块的运动来分别实现槽宽和槽深的加工,另外通过一个定位销及螺栓联接实现主轴架的分度调节,以实现水平、垂直四个正交方向键槽的加工。加工进给的每一个往复运动中,中拖板的水平运动及滑块的上下运动均由锁紧机构利用变频器控制进给电机和切削电机的转速,实现进给速度和切削速度的调整。该工装是在一次装夹的基础上实现多处键槽加工,因而不仅能够保证舵叶锥孔本身的加工精度,而且能够保证对称双键槽的形位精度。此设计不仅可以减少工人劳动强度,而且可以保证加工质量,从而可以获得更好的经济效益。

关键词:舵,铣削加工,键槽,专用机床

Abstract :With the development of the times, machine industry has been very popular, but large parts of the processing, they want to use a special machine for processing.
The processed products for large tankers rudder device keyway,Can also be used for large-scale structure of the processing keyway . The rudder device keyway to hole keyway , Hole of the conical hole, Not run through the holes, Moreover structure of two key connection , Large size , High precision machining. This is a presentation of the keyway installation of the rudder processing and for the processing and design of the keyway dedicated machine.
The machine is a dedicated Milling Machine, Its bed and the overall structure of a lathe, Cutting function of the milling, Principle of its total whole installation box cutter and the drive shaft extension units of a large Worktable movement, Enter the hole, With Finger-shaped cutter Milling to Processing the hole keyway. A large table of horizontal movement to achieve trough direction of the length of processing, And the second stage through the vertical direction of the movement to block the realization of the respective width and depth of processing, Through a marketing and bolts to achieve workstations adjust the angle , Achieve the level of four vertical direction on the cross-slot processing . Feed every one of the reciprocating movement , The second stage of horizontal movement and block movement of the people in campaigns by organizations using fixed frequency electrical machinery control mobiles and the processing speed of motor rotation , Achieving velocity mobile speed and processing speed of adjustment . The Tooling is a fixture on the basis of multiple processing keyway, thus can not only ensure the rudder itself leaves the cone hole machining accuracy, but also to guarantee the keyway symmetric double-precision. This design can not only reduce the labor intensity, but can guarantee the quality of processing, thereby be better economic benefits.

Keywords: Rudder; Milling Machine Processing; Keyway; Special Machine

目 录
第一章 绪论………………………………………………………(1)
1.1课题背景…………………………………………………(1)
1.2铣削技术的发展…………………………………………(1)
1.2.1一般铣削技术……………………………………(1)
1.2.2铣外圆键槽的加工方法…………………………(5)
1.2.3铣内孔键槽的加工方法…………………………(5)
1.3立题目的和意义…………………………………………(6)
第二章 零件工艺分析……………………………………………(7)
2.1零件整体分析……………………………………………(7)
2.2加工工艺的确定…………………………………………(8)
2.3结论………………………………………………………(10)
第三章 总体方案比较……………………………………………(12)
3.1总体方案设计……………………………………………(12)
3.1.1电动机的选取……………………………………(12)
3. 1. 2 联轴器的选择 …………………………………(15)
3.1.3 联轴器的校核 …………………………………(15)
第四章 总体部件设计及计算 …………………………………(17)
4.1 齿轮的计算及校核…………………………………… (17)
4.1.1 齿轮1、2的计算及校核……………………… (17)
4.2 轴的设计及校核……………………………………… (22)
4.2.1 轴I的设计和校核…………………………… (22)
4.3 轴承的选定及校核…………………………………… (26)
4.4 键的选择和计算……………………………………… (26)
4. 5 丝杆的选择和校核…………………………………… (28)
第五章 造型 …………………………………………………… (32)
5.1 AotuCAD的平面图形的绘制 ………………………… (32)
5.1.1 AotuCAD的介绍 ……………………………… (32)
5.1.2 AotuCAD绘制部分图纸 ……………………… (32)
5.2 Pro/E的三维建模 …………………………………… (32)
5.2.1 Pro/E的介绍 ………………………………… (33)
5.2.2 轴的三维图形 ………………………………… (33)
5. 2. 3 锥齿轮的三维图形 …………………………… (33)
第六章 结束语 ………………………………………………… (35)
致谢辞 …………………………………………………………… (36)
参考文献 ………………………………………………………… (37)
附录1:英语翻译

第一章 绪论
1.1 课题背景
零件与零件之间,有很多中连接方式,带,键等等,其中最为常见的连接方式也就是通过键的连接,就如本课题,舵叶与舵的连接就是依靠键来传动扭矩,调整舵的方向。
但是舵上面的键是在舵叶孔内的,加工键的方法也有很多,通常采用插削、拉削、铣削、刨削以及其他几种加工方法。对于像舵叶这种大型结构件上键槽,在一般的普通小型机床上是很难进行加工的。舵叶轴毂为深锥孔,属于盲孔一类,其连接键槽为对称型双键,该加工问题一直都是加工键槽上的一个难点问题,无法采用恰当的加工方法和加工手段解决其加工问题。因舵叶尺寸大,而且又是盲孔,因此无法采用插削法和拉削法来加工键槽,而刨削法效率低,并且受孔经的大小限制,刨头的刚性和刨削行程达不到要求,若采用普通车床加专用工装则加工精度、效率、刚性等均无法满足生产要求,所以设计一种专用加工大型结构键键槽机床是适应需求的,也是推动生产力的,设计专用机床也是必须的。所以在这里设计本机床主要是用来解决此舵装置键槽的加工问题,本机床也可用于其它大型结构件内空键槽的加工。

查看评论 已有0位网友发表了看法
  • 验证码: