您现在的位置:网站首页答辩论文工学论文电子论文

16路同步计数定时可编程控制器

  • 简介:(论文 字数:13399 页数:34)摘 要:在自动控制中,往往用预置计数多少或定时长短来控制多个电路同时及先后工作。本文介绍的用MCS-51系列8051单片机设计而成的16路同步计数/定时可编程控制器,在一定计数范围内,每路可任意设定启、闭两个计数数据或时间...
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载

(论文 字数:13399 页数:34)摘 要:在自动控制中,往往用预置计数多少或定时长短来控制多个电路同时及先后工作。本文介绍的用MCS-51系列8051单片机设计而成的16路同步计数/定时可编程控制器,在一定计数范围内,每路可任意设定启、闭两个计数数据或时间数据,同时对16路进行同步操作,各路按启、闭设定值完成各自的状态输出,来达到控制目的。根据多种不同的控制要求都能灵活使用,因此应用范围非常广泛。
当应用要求大于16路时,可将多个控制器的信号输入端并联或上一个输出端和下一个信号输入端串联使用,输出口扩展至32、48甚至更多。如果两个控制器的信号输入端并联输入,其输出端用矩阵方式连接后,将扩展成256路。
袋式除尘设备中,要求对一个或多个汽缸的提升阀和脉冲阀进行同时或顺序控制,达到用脉冲气流喷吹除尘的目的。控制器在实现提升阀与脉冲阀的准确控制中能灵活的应用。
与光电、霍尔、行程等传感器结合,可在板材规格裁切、线材长度控制、实体厚度切割、食品及包装机械等加工领域实现复杂的控制过程。

关键词:自动控制,8051,16路,可编程控制器

ABSTRACT :In automatic control, usually use to prepare to place to count how much or settle the length controls several electric circuits at the same time and work successively.This text is introductive to count synchronously with 8051 machine designs of serieses MCS-51s but 16 roads that becomes/ settle programmable controller, within the scope of certainly count, each the road can set the start and close arbitrarily two count data or time datas, carrying on the synchronous operation to 16 roads at the same time, each road press start, close the initial value complete each from of appearance output, attain to control the purpose.Various different controls of basis requests are all the ability vivid usage, so the application is very extensive.
When the application is had big request in 16 roads, can input several signals of controller to carry to merge or previous exportation carry to input to carry to establish the usage with next signal, outputting to expand to 32 and 48 even more.If two signal importations of controller carry to merge the importation, its exportation will expand after carry use the matrix method conjunction 256 roads.
The bag type in addition to in the dust equipments, request to promote the valve and the pulse valves to carry on to an or several cylinderses at the same time or in proper order control, attain to spray to blow with the pulse current of air in addition to the purpose of the dust.The controller is in carry out accurate control of promote the valve and the pulse valve vivid application of ability.
Give or get an electric shock with light, route of travel etc. spreads the feeling machine to combine, can cut to slice in the plank material specification, the line material length control, the entity thickness incise, food and packing machine etc. processes the complicated control process of the realm realization.

Keywords: Automatic control,8051,16 roads,Programmable controller

目 录

第1章 16路同步计数/定时可编程控制器介绍 1
1.1 绪论 1
1.2 本论文研究内容 2
1.3 发展前景 2
第2章 方案设计与讨论 4
2.1 方案一 4
2.2 方案二 6
2.3 方案的比较与选择 7
第3章 微处理器89C51的简介 9
3.1 引脚性能 9
3.2 通用计数器简介 11
3.3 技术指标 12
第4章 单元电路设计 16
4.1 电源部分 16
4.2 控制部分 16
4.3 显示部分 17
4.4 输出部分 19
第5章 程序设计 20
5.1 键盘扫描程序 20
5.2 显示子程序 21
5.3 输出子程序 22
第6章 应用实例 24
6.1 电路结构功能 24
6.2 工作原理 25
6.3 程序设计 25
第7章 总结 28
致谢 29
参考文献 30
附录1 31
附录2 38
附录3 43

第1章 16路同步计数/定时可编程控制器介绍

1.1 绪论
计数器在国内早期的发展状况如下:
1963年南京电讯仪器厂研制成电子管PJD系列频率计,其中PJD-3 型数字式频率计可测频1MHZ,是全国第一台数字显示的频率计。
1965年开发的PJD-6型频率计,测频范围可达30MHZ。1964年该厂承担国家科委组织的10MHZ锗晶体管数字式测频计联合攻关的主攻任务。1965年该厂在元器件厂及南京工学院等单位的协作下,成功地研制出全晶体管的E312型通用计数器。该仪器具有测频率周期、时间间隙及计数等多种功能,结构上采用印刷电路板,是国内最早实现全晶体管化、数字式和印制板化的测频仪器。

查看评论 已有0位网友发表了看法
  • 验证码: