您现在的位置:网站首页答辩论文工学论文机械论文

DTⅡ型固定式带式输送机设计

  • 简介:(毕业设计48页23320字+CAD图纸+任务书+外文翻译+调研报告 全套) 摘 要 本次毕业设计是关于DTⅡ型固定式带式输送机的设计。首先对胶带输送机作了简单的概述;接着分析了胶带输送机的选型原则及计算方法;然后根据这些设计准则与计算选型方法按照给定参数要...
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载

(毕业设计48页23320字+CAD图纸+任务书+外文翻译+调研报告 全套)

摘 要
本次毕业设计是关于DTⅡ型固定式带式输送机的设计。首先对胶带输送机作了简单的概述;接着分析了胶带输送机的选型原则及计算方法;然后根据这些设计准则与计算选型方法按照给定参数要求进行选型设计;接着对所选择的输送机各主要零部件进行了校核。普通型带式输送机由六个主要部件组成:传动装置,机尾或导回装置,中部机架,拉紧装置以及胶带。最后简单的说明了输送机的安装与维护。目前,胶带输送机正朝着长距离,高速度,低摩擦的方向发展,近年来出现的气垫式胶带输送机就是其中的一个。在胶带输送机的设计、制造以及应用方面,目前我国与国外先进水平相比仍有较大差距,国内在设计制造带式输送机过程中存在着很多不足。
本次带式输送机设计代表了设计的一般过程, 对今后的选型设计工作有一定的参考价值。
关键词:带式输送机 传动装置 导回装置


Abstract
The design is a graduation project about the belt conveyor. At first, it is introduction about the belt conveyor. Next, it is the principles about choose component parts of belt conveyor. After that the belt conveyor abase on the principle is designed. Then, it is checking computations about main component parts. The ordinary belt conveyor consists of six main parts: Drive Unit, Jib or Delivery End, Tail Ender Return End. Intermediate Structure, Loop Take-Up and Belt. At last, it is explanation about fix and safeguard of the belt conveyor. Today, long distance, high speed, low friction is the direction of belt conveyor’s development. Air cushion belt conveyor is one of them. At present, we still fall far short of abroad advanced technology in design, manufacture and using. There are a lot of wastes in the design of belt conveyor.
Keywords: the belt conveyor Drive Unit Delivery End


目 录
第一章 前言…………………………………………………………………………………………1
1.1带式输送机的应用 …………………………………………………………………………1
1.2带式输送机的分类 …………………………………………………………………………1
1.3 各种带式输送机的特点 …………………………………………………………………1
1.4 带式输送机的发展状况 …………………………………………………………………2
1.5 带式输送机的工作原理 …………………………………………………………………3
1.6 带式输送机的结构和布置形式 …………………………………………………………4
第二章 带式输送机的设计计算……………………………………………………………………8
2.1 已知原始数据及工作条件 ………………………………………………………………8
2.2 带式输送机的计算步骤 …………………………………………………………………8
第三章 驱动装置的选用 …………………………………………………………………………17
3.1电机的选用 ………………………………………………………………………………17
3.2 减速器的选用 ……………………………………………………………………………17
第四章 带式输送机部件的选用 …………………………………………………………………22
4.1 输送带 ……………………………………………………………………………………22
4.2 传动滚筒 …………………………………………………………………………………24
4.3 托辊 ………………………………………………………………………………………31
4.4 制动装置 …………………………………………………………………………………36
4.5 改向装置 ………………………………………………………………………………38
第五章其他部件的选用……………………………………………………………………………39
5.1 机架与中间架 ……………………………………………………………………………39
5.2 给料装置 …………………………………………………………………………………40
5.3 卸料装置 …………………………………………………………………………………42
5.4 清扫装置 …………………………………………………………………………………43
5.5 头部漏斗 …………………………………………………………………………………44
5.6电气及安全保护装置………………………………………………………………………45
第六章 总结 ………………………………………………………………………………………46
致 谢………………………………………………………………………………………………47
参考文献…………………………………………………………………………………………48

\

查看评论 已有0位网友发表了看法
  • 验证码: