您现在的位置:网站首页答辩论文工学论文机械论文

CK6140数控卧式车床及控制系统的设计

  • 简介: 摘 要数控车床又称数字控制(Numbercal control,简称NC)机床。它是基于数字控制的,采用了数控技术,是一个装有程序控制系统的机床。它是由主机,CNC,驱动装置,数控机床的辅助装置,编程机及其他一些附属设备所组成。本次设计课题是CK6140数控卧室...
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载

摘  要
数控车床又称数字控制(Numbercal control,简称NC)机床。它是基于数字控制的,采用了数控技术,是一个装有程序控制系统的机床。它是由主机,CNC,驱动装置,数控机床的辅助装置,编程机及其他一些附属设备所组成。
本次设计课题是CK6140数控卧室车床,CK是数控车床,61是卧式车床,40是床身上最大工件回转直径为400mm。
此次设计包括机床的总体布局设计,纵向进给设计,其中还包括齿轮模数计算及校核,主轴刚度的校核等。控制系统部分包括步进电机的选用及硬件电路设计和软件系统设计,说明了芯片的扩展,键盘显示接口的设计等等。

关键词  数控机床;开放式数控系统;电动机

Abstract

The numerical control lathe called the numerical control (Numbercal control, is called NC) the engine bed. It is based on the numerical control, has used the numerical control technology, is loaded with the procedure control system the engine bed. It is by the main engine, CNC, the drive, the numerical control engine bed auxiliary unit, the programming machine and other some appurtenances is composed.
This design topic is the CK6140 numerical control bedroom lathe, CK is the numerical control lathe, 61 is the horizontal lathe, 40 is on the lathe bed the biggest work piece rotation diameter is 400mm.
This design including the engine bed overall layout design, longitudinal enters for the design, also includes the gear modulus computation and the examination, the main axle rigidity examination and so on. The control system partially including step-by-steps the electrical machinery to select and the hardware circuit design and the software system design, explained the chip expansion, keyboard demonstration connection design and so on.

Key word  numerical control tool;Open-architecture;motor
目  录
1  总体方案设计
1.1 CK6140的现状和发展
1.2 CK6140数控卧式车床的总体方案论证与拟定
2  机械部分设计计算说明
2.1 主运动部分计算
2.1.1  参数的确定
2.1.2  传动设计
2.1.3  转速图的拟定
2.1.4  带轮直径和齿轮齿数的确定
2.1.5  传动件的估算和验算
2.1.6  展开图设计
2.1.7  截面图设计
2.2纵向进给运动设计
2.2.1 滚珠丝杆副的选择
2.2.2 驱动电机的选用
3  控制系统设计
3.1绘制控制系统结构框图
3.2.选择中央处理单元(CPU)的类型
3.3存储器扩展电路设计
3.4 I/O接口电路及辅助电路设
参考文献
谢词
附录

 

参 考 文 献

(1).张建民主编        《机电一体化系统设计》               北京理工大学出版社
(2).                  《机电一体化系统设计手册》            国防工业出版社
(3).龚桂义主编        《机械设计课程设计手册》              高等教育出版社
(4).                  《机械零件设计手册》(第二版)(上册)    冶金工业出版社
(5).何立民主编       《单片机应用系统设计》                北京航空航天大学出版社  1990年
(6).何淑华主编       《单片微型机原理及应用》              哈尔滨工业大学出版社
(7).李光斌编          《计算机数控系统设计指导》            华中理工大学出版社
(8).                   《机械设计》                          高等教育出版
(9).                  《机床设计手册》(1~3册)              机械工业出版社
(10).赵大兴、李天宝主编《现代工程图学.教程》                  湖北科学出版社
(11).顾维邦            《金属切削机床概论》                   机械工业出版社
(12).甘勇立主编        《几何量公差与检测》(第五版)          上海科学技术出版社
(13).黄鹤汀主编       《金属切削机床设计》                   机械工业出版社
(14).朱张校主编        《工程材料》                           清华大学出版社
(15).孙恒、陈作模主编   《机械原理》                          高等教育出版
(16). 王隆太主编          《先进制造技术》                        机械工业出版社
(17).范钦珊主编   《材料力学》                          高等教育出版社

查看评论 已有0位网友发表了看法
  • 验证码: