您现在的位置:网站首页答辩论文工学论文电子论文

精密播种机检测装置系统(73页论文、图纸、程序、翻译全套毕业设计)

  • 简介:摘要 本文研制的精密播种机检测装置系统,是利用机电一体化技术,解决漏播问题的一次尝试。它是一套新型、实用的微处理机自动检测系统,将单片机与检测系统相结合,提高系统的性能,实现了自动化。若播种机播种出现故障,它可进行自动监控和声光双向报警...
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载

摘要

本文研制的精密播种机检测装置系统,是利用机电一体化技术,解决漏播问题的一次尝试。它是一套新型、实用的微处理机自动检测系统,将单片机与检测系统相结合,提高系统的性能,实现了自动化。若播种机播种出现故障,它可进行自动监控和声光双向报警,及时通知驾驶员故障的位置和性质,最大限度地避免漏种现象的发生,极大提高了播种机的工作质量和智能化水平。

本文在对目前国内外同类系统进行大量比较分析的基础上,详细介绍了精密播种机检测装置的总体方案的设计思想、硬件电路和软件程序的设计。它以AT89C51单片机为核心,配以相应的处理电路,采用汇编语言编制系统监控程序。

 

关键词 精密播种机 报警显示 单片机 检测

 

 

 

                                                                                   Abstract

Microprocessor controlled precision seeding system study in the paper is an attempt to solve this absent seeding problem by combining mechanics and electronics. In the papera successful development of a set of useful system combined with microprocessor is introduced which detects and supplements absent seeds.This system combines computer and mechanical measurementimproving its capacity and realizing its automatization. When the seeder go wrongit can be automonitor and voice light alarm in order to inform malfunction character and locality. At the same timeif drill go wrongit can be absence compensation.It will farthest avoid seeding absence.

This paper introduces in detail the overall system designing thought way of work condition monitoring and malfunction alerting system of construction machineryand the design technique of its hardware schema circuit and software program on the basic of comparative analysis to the cognate systems at home and abroad.This system with the core of MCS-51 single chip microprocessor, followed with some processing circuits,which monitoring program is composted with assembler language.

                                            

Keywords  Precision Seeding  Warning and Display  

 Single Chip-Microcomputer  Detection

目录

摘要... I

Abstract II

 

1 绪 论... 1

1.1 问题的提出和研究意义... 1

1.2国内外研究动态和趋势... 2

1.2.1精密播种机监控系统的迅速发展... 2

1.2.2 国内对精播机监控系统的研究... 3

1.2.3 国外对精播机监控系统的研究... 5

1.3 研究内容... 6

2 系统整体方案确定... 7

2.1 系统框图... 7

2.2系统检测原理... 9

2.3系统功能设计要求... 11

3  硬件电路设计... 12

3.1 直流稳压电源设计... 12

3.1.1 系统开发直流电源... 12

3.1.2 +5V直流稳压电源的设计... 12

3.2 传感器系统电路设计... 13

3.2.1 传感器设计方案比较... 13

3.2.2 传感器电路设计... 15

3.2.3 传感器安装... 16

3.2.4 传感器输入信号设计... 16

3.3 单片机系统设计... 22

3.3.1 单片机控制芯片的选择... 22

3.3.2 单片机时钟电路及复位电路... 25

3.3.3 译码器的选用... 26

3.4 动态显示电路设计... 28

3.5 报警系统设计... 29

3.5.1 指示灯报警系统的设计... 29

3.5.2 声音报警系统的设计... 30

3.6 定时系统设计... 31

3.6.1 可编程定时器/计数器 8253 逻辑结构... 32

3.6.2 在本系统中 8253 的应用... 33

4 软件设计... 34

4.1 主程序... 34

4.2 漏种检测子程序... 36

4.3 报警子程序... 37

4.4 显示子程序... 37

4.5 8259中断子程序... 39

5  抗干扰设计... 40

5.1系统中主要干扰渠道... 40

5.2系统硬件抗干扰措施... 40

5.2.1采用集成电路单独供电... 40

5.2.2 接地线设计... 41

5.2.3 去耦电容配置... 41

5.2.4 光电耦合器... 41

5.3 系统软件抗干扰设计... 42

5.3.1 指令冗余措施... 42

5.3.2 软件陷阱的设计... 43

6  系统可行性分析... 44

6.1系统调试试验... 44

6.2经济性分析... 44

6.2.1 节约人力资源... 44

6.2.2 减少耕地面积浪费... 45

6.2.3 本检测装置价格低廉... 45

结论... 46

致谢... 47

参考文献... 48

附录1... 50

附录2... 56

附录3... 67

查看评论 已有0位网友发表了看法
  • 验证码: