您现在的位置:网站首页答辩论文工学论文机械论文

小型液压挖掘机设计(完整一套设计,有说明书:论文,图纸)

  • 简介:小型液压挖掘机设计(完整一套设计,有说明书:论文,图纸) 臂架管路.dwg 铲斗油缸.dwg 车身管路布置.dwg 底盘管路.dwg 动臂油缸.dwg 斗杆油缸.dwg 推土油缸.dwg 液压系统原理图.dwg 油流动原理图.dwg 说明书.doc 外文翻译.doc 小型液压挖掘...
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载

小型液压挖掘机设计(完整一套设计,有说明书:论文,图纸)

臂架管路.dwg

铲斗油缸.dwg

车身管路布置.dwg

底盘管路.dwg

动臂油缸.dwg

斗杆油缸.dwg

推土油缸.dwg

液压系统原理图.dwg

油流动原理图.dwg

说明书.doc

外文翻译.doc


小型液压挖掘机设计说明书

 


【摘要】 文章主要介绍小型挖掘机的液压系统的设计和有关计算。首先介绍小型挖掘机的工作概况及性能参数的设计要求,并根据性能参数来选择主要的工作元件。接着介绍液压系统中各个工作装置的工作原理,了解挖掘机的行走,工作台的回转运动,铲斗、动臂、斗杆的工作情况,以及运动过程中油液的流动方向。然后对工作装置的驱动进行设计,包括液压缸主要参数的设计及液压缸工作时主要参数的计算,并根据具体情况为液压缸设计缓冲装置。最后,举例说明液压系统的压力损失和压力损失计算,并对管接头和管道的连接情况和主要参数进行详细介绍,提供选择元件的依据。
【关键词】 液压系统 工作原理 压力损失

【Abstract】 This article mainly presents the design and relevant calculation of the hydraulic system in the mini excavator. First of all, the general information is displayed in such aspects as how the mini excavator works, what performance parameters are required in designing and how to choose the major components according to the parameters.   Secondly, the article presents the working principle of every part in the hydraulic system to understand how the excavator walks, how the workbench turns around, how the bucket, the arm and the boom respectively works. At the same time the flowing direction of the oil is also presented. After that, it reveals the design of the drive of the working settings including the design of the major parameters of the hydraulic cylinder and its calculation at work. The cushion setting is designed based on special situation. In the end, the examples are taken to present the press loss of the hydraulic system and its calculation. The information about the pipe′s tie-in and the pipe′s linking as well as the major parameters is presented in detail to provide reference for the choice of the components.
【Key Word】 hydraulic system    working principle    press loss

 

 

 

 

 

目录
1. 引言………………………………………………………………………………………………`3
1.1 液压挖掘机的概述……………………………………………………………………………3
1.1.1液压挖掘机………………………………………………………………………………4
1.1.2单斗反铲液压挖掘机……………………………………………………………………4
1.1.3液压挖掘机工作循环过程………………………………………………………………5
1.2液压挖掘机系统组成………………………………………………………………………….5
1.2.1动力系统…………………………………………………………………………………6
1.2.2机械系统…………………………………………………………………………………6
1.2.3液压系统…………………………………………………………………………………6
1.2.4控制系统…………………………………………………………………………………8
2. 总体性能参数设计要求……………………………………………………………...9
3. 系统传动及主要元件选型……………………………………………………………………9
4. 液压系统各部分的工作原理……………………………………………………………….10
4.1.铲斗液压缸的工作原理………………………………………………………………………11
4.2.动臂液压缸的工作原理………………………………………………………………………12
4.3.斗杆液压缸的工作原理………………………………………………………………………12
4.4.推土液压缸的工作原理………………………………………………………………………13
4.5.行走马达的工作原理…………………………………………………………………………14
4.6.回转马达的工作原理…………………………………………………………………………14
5. 传动系统设计计算……………………………………………………………………………16
5.1.行走马达计算…………………………………………………………………………………17
5.2.回转马达计算…………………………………………………………………………………17
5.3 工作装置驱动计算……………………………………………………………………………19
5.3.1动臂液压缸设计及计算…………………………………………………………………21
5.3.2斗杆液压缸设计及计算…………………………………………………………………23
5.3.3铲斗液压缸设计及计算…………………………………………………………………24
6. 液压缸的缓冲装置……………………………………………………………………………25
6.1.缓冲的目的和方法……………………………………………………………………………26
6.2.缓冲装置的计算………………………………………………………………………………26
7. 液压系统压力损失的验算………………………………………………………………….26
8. 管接头和管件的说明…………………………………………………………………………27
9. 谢辞……………………………………………………………………………………………….38
10.主要参考文献………………………………………………………………………………….39

 

 

 

 


主要参考文献

[1]张利平、邓钟明:液压系统气压系统设计手册,机械工业出版社
[2]章宏甲、黄谊:液压传动,机械工业出版社
[3]雷天觉:液压工程手册,机械工业出版社
[4]机械设计手册,机械工业出版社
[5]杨培元:液压传动,上海科学技术文献出版社
[6]杨培元:液压系统设计简明手册,机械工业出版社
[7]赵显新:工程机械液压传动装置,辽宁科学技术出版社
[8]颜荣庆:现代工程机械液压与液力系统,人民交通出版社
[9]波诺马连科:液压支架液压传动的计算与设计
[10]濮良贵:机械设计,高等教育出版社
[11]液压与气动期刊,北京机械工业自动化所
[12]Magazine:Recycleing today,2003
[13]FLUID POWER SYSTEM,A.B.GOODWIN
[14]HYDRAULIC AND PNEUMATIC POWER FOR PRODUCTION,HAPPY L,STEWART


查看评论 已有0位网友发表了看法
  • 验证码: