您现在的位置:网站首页答辩论文工学论文机械论文

基于CAN总线的灌溉控制系统设计_(上位机:中心控制系统)(完整一套设计,有说明书:论文,程序)

  • 简介:基于CAN总线的灌溉控制系统设计_(上位机:中心控制系统)(完整一套设计,有说明书:论文,程序) 一套CAN(8110)源程序 毕业设计说明书(修改版).doc 汇报演示.ppt 教师意见及答辩情况.doc 开题报告(修改).doc 任务书.doc 文献综述(修改).doc ...
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载

基于CAN总线的灌溉控制系统设计_(上位机:中心控制系统)(完整一套设计,有说明书:论文,程序)

一套CAN(8110)源程序

毕业设计说明书(修改版).doc

汇报演示.ppt

教师意见及答辩情况.doc

开题报告(修改).doc

任务书.doc

文献综述(修改).doc

选题指南.doc

目录

1、绪论
1.1课题提出的背景、意义及必要性
1.2目标与内容
1.2.1目标
1.2.2主要内容
1.3国内外技术发展趋势
1.4技术路线
1.4.1系统工作原理图
1.4.2技术思路
1.5推广应用前景分析
2、设计说明
2.1系统功能
2.2系统软件设计
2.2.1标准模块的核心代码
2.2.2 canform窗体
2.2.3 passform窗体
2.2.4 filedform窗体
2.2.5 setform窗体
2.2.6 teamform窗体
2.2.7 bzform窗体
2.2.8 teamform2窗体
2.2.9 hisform窗体
2.2.10 xxform窗体
3、附录
3. 1软件使用说明书
3.1.1 操作步骤
3.1.2 阀门随机编组
3.1.3 阀门状态显示模块
3.1.4 浏览环境信息
3. 1. 5 意见和反馈 
3. 2 系统调试与安装图片
4、结束语
5、参考文献

摘要
基于现场总线的通讯与控制技术是当前工业自动控制领域中的主要发展技术之一

,它具有信息数字化、控制分散化等优点,在自动控制领域中应用日益广泛。现

场总线技术的国际先进水平已达到二芯载波电缆控制10Km距离的推广阶段,但在

我国的大田农业灌溉控制系统应用上,基于总线方式的控制技术还十分薄弱。当

前大田灌溉的自动控制系统多采用直接进口,技术先进,性能稳定,但成本昂贵

,很难得到大面积推广应用;因此,借鉴先进的设计思想,开发具有自主知识产

权的基于现场总线的灌溉控制系统及与之配套的中央控制器和终端控制单元,降

低投入成本,提高设备的可靠性、易操作性、可升级性和标准化等主要技术指标

,符合农业现代化对自动化技术的发展需求。
    基于现场CAN总线的灌溉自动控制系统的核心是灌溉控制器的开发,灌溉控

制器应具有可靠性,易操作性,可升级性和国际化等特点
本设计是基于CAN总线的阀门监控系统,具有用线少、实时性好、速度快等优点

,并采用触摸屏操作,安全可靠易操作。本系统目前已在111团1连进行试验,取

得了预期的效果。技术实用性强,成本大幅度降低,是农业现代化走向信息化必

不可少的步骤。同时能够打破兵团自动化灌溉控制技术主要依赖进口的局面,示

范推广具有兵团自主知识产权的管理软件。

关键词:CAN总线  终端控制单元   灌溉自动控制   阀门监控

Abstract
According to the field bus is total line of communication and control 

the technique is an one of the main development technique within 

automatic control realm of current industries, it to have the 

information digitize, control scatter  etc. International and advanced 

level that advantage, at auto control the realm inside application 

increasingly extensive. The total line technique of the spot is 

already to two metalcores carry an electric cable control 10 control 

technique that Km distances expansion stage, but on our country of the 

big field agriculture irrigate to control the system application, 

according to the total line method return very weak. Current and big 

field the auto that irrigate control many adoptions of systems to 

directly import, and the technique is advanced, function stability, 

but the cost is expensive, very rare expand application to the big 

area; Therefore, design that draw lessons from forerunner thought, the 

development have the right of independence knowledge property of 

according to the spot is total to line irrigate to control the system 

and with it the kit's central controller control the unit with 

terminal, and lower to throw in the cost, and increase the 

equipments's dependable, easy operability, can promote to higher grade 

the sex with standardize to wait the main technique index sign, and 

match the agriculture modernization to development automate technique 

need.
    According to the CAN  bus is total to line irrigate the core of 

the automatic control system is a development to irrigate controller, 

and irrigate the controller should have the dependable, easy 

operability, and can promote to higher grade the sex with 

internationalize to wait the characteristics
The valve door that this design base on CAN  bus is total the line 

supervise and control the system, and have to use the line little, 

solid hour good, flat-out quick etc. Advantage, and adoption the touch 

hold operation, safety dependable easily operate. This system is now 

and already at 111 regiment 1 connected to start experiment, obtain 

the anticipant result. The technique function is strong, and the cost 

is significant to lower, and is an agriculture to modernize the 

alignment the information  the essential to have's step. can break the 

large unit the automation to irrigate to control the technique the 

main counting on the situation that import at the same time, and the 

demonstrate expand to have the large unit independence knowledge 

property the power's management software.

Keywords:CAN bus  RTU   automatic control irrigation   choke 

supervision

参考文献
[1]李世平等编著,Pc计算机测控技术及应用西安:西安电子科技大学出版社.2003
[2] 张俊安.用VB实现Windows 9x环境下的串口通信[J].山东煤炭科技,2000,(增刊);73—74.
[3]SJA1000独立的CAN控制器应用指南.广州:广州周立功单片机发展有限公司,2002。
[4]张培仁等.自动控制技术和应用EM3.合肥:中国科学技术大学出版社,2001

[5]夏继红,严忠民,周明耀,等.农田灌溉决策支持与控制系统的设计与应用[J].河海大学学报,2001,29(6):6-10
[6]武鹏林,张向东.节水灌溉系统变频控制的节能研究与应用[J].农业工程学报,2002,18(4):22-25
[7]李  彬,金兆森,徐文元.丘陵山区节水灌溉工程自动控制系统[J].扬州大学学报(自然科学版),2004,7(2):38-41
[8]边宁宁,宓国光,费敏锐.一种基于Device Net现场总线的智能阀控制系统[J].自动化仪表,2002,23(9):53-55
[9]陈建恩,王立人,苗香雯.温室数据采集系统远程通信接口设计研究[J].农业工程学报,2003,19(4):259-263
[10]齐学斌,高胜国,赵  辉,等.北方井灌区井群无线自动控制系统的开发研制[J].水利学报,2005,36(2):232-237
[11]王  涛,吴小钰,曾红专,等.基于BP神经网络的PID控制器在渠道自动控制中的应用[J].水利学报,2004,35(11):91-96
[12]阳宪惠.现场总线技术及其应用.北京:清华大学出版社,1999
[13]邬宽明.CAN总线原理和应用系统设计.北京:北京舫空航天大学出版社,1996
[14] SJA1000 Data Sheet(数据手册)[Z],Philips公司
[15]周立功.ARM微控制器基础与实战[M].北京:北京航空航天大学出版社,2003
[16] 蒋建文,林勇,韩江洪.CAN总线通信协议分析和实现
[17].计算机工程,2002,28(2):219。220
[18] 孙韬,刘宗行,吴斌.基于CAN总线构成的分布式通信网络的应用[J].重庆大学学报,2003,26(1):69—72.
[19] 肖海荣,周风余.基于S.IA1000的CAN总线系统智能节点设计
[20].计算机自动测量与控制,2001.9(2):48—58。

查看评论 已有0位网友发表了看法
  • 验证码: