您现在的位置:网站首页答辩论文工学论文机械论文

精密数控平面磨床设计(完整一套设计,有说明书:论文,图纸)

  • 简介:精密数控平面磨床设计(完整一套设计,有说明书:论文,图纸) 垂直机构.dwg 垂直轴零件.dwg 接线图.dwg 微位移.dwg 赵金龙.rtf 毕业论文.doc 毕业论文目录.doc 翻译.doc 总体图.dwg 目 录1 绪论 11.1课题背景及目的11.2 国内外研究状况31.2...
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载

精密数控平面磨床设计(完整一套设计,有说明书:论文,图纸)

垂直机构.dwg

垂直轴零件.dwg

接线图.dwg

微位移.dwg

赵金龙.rtf

毕业论文.doc

毕业论文目录.doc

翻译.doc

总体图.dwg

目    录
1 绪论 ………………………………………………………………………… 1
1.1课题背景及目的…………………………………………………………1
1.2 国内外研究状况…………………………………………………………3
1.2.1 国外数控磨削的发展………………………………………………3
1.2.2 国内数控磨削的发展………………………………………………5
   1.3 毕业设计任务与论文组成………………………………………………7
   1.4 本课题的研究方法………………………………………………………7
2 数控平面磨床总体设计 ………………………………………………………9
2.1磨床简介 ……………………………………………………………………9
2.2磨床技术规格………………………………………………………………9
2.3磨床总体布局设计…………………………………………………………10
2.4磨床总体传动设计…………………………………………………………12
2.5主要结构及其说明…………………………………………………………12
3  砂轮架(磨头)设计  …………………………………………………………14
3.1 砂轮架设计 ………………………………………………………………14
3.2砂轮架的结构特点………………………………………………………14
4  垂直进给机构的设计 ………………………………………………………16
   4.1垂直进给机构的结构和特点………………………………………………16
   4.2确定垂直进给机构方案……………………………………………………16
   4.3滚珠丝杆副介绍……………………………………………………………17
      4.3.1滚珠丝杠的设计计算………………………………………………18
      4.3.2梯形螺纹丝杆压杆稳定性校核……………………………………19
   4.4垂直进给电机的功率计算…………………………………………………20
5  微位移工作台设计………………………………………………………………22
   5.1微位移简介…………………………………………………………………22
      5.1.1微位移机构的分类……………………………………………………23
      5.1.2微位移系统的应用……………………………………………………24
   5.2微位移机构的原理…………………………………………………………25
       5.2.1压电与电致伸缩效应——机电偶合效应……………………25
         5.2.2材料……………………………………………………………26
       5.2.3压电、电致伸缩器件…………………………………………26
     5.3微位移工作台的结构设计………………………………………………27
         5.3.1微位移工作台的结构……………………………………………27
         5.3.2板弹簧的设计……………………………………………………28
         5.3.3予紧力与系统分辨率……………………………………………28
6 磨床数控硬件电路设计 ………………………………………………………30
     6.1 802D数控系统简介……………………………………………………30
     6.2 802D数控系统组成……………………………………………………30
     6.3 802D数控系统的连接…………………………………………………31
总结…………………………………………………………………………………33
致谢…………………………………………………………………………………34
参考文献……………………………………………………………………………35

 摘要
这是一篇对精密数控平面磨床机构整体设计做出详细说明的文章。随着磨削技术的发展,磨床在加工机床中也占有相当大的比例。磨削技术及

磨床在机械制造业中占有极其重要的位置。总之,磨削技术发展很快,在机械加工中起着非常重要的作用。
本文由绪论、总体设计、砂轮架(磨头)设计、垂直进给机构设计、微位移工作台结构、数控硬件设计、总结和致谢等几个部分组成。
绪论部分对精密加工的作用和地位做了介绍,阐述了精密磨削技术的发展和背景,同时还有介绍其工艺特点及国内外磨削技术的现状。
总体设计跟砂轮架设计做了简要的介绍,主要是对垂直进给机构和微位移工作台做了详细的说明,对硬件电路也做出了研究。
最后通过总结来对此次设计做出一个回顾和对机床制造做出展望。
关键词:精密,数控,平面磨床,垂直进给机构

Abstract
This is a paper which explains for the whole framework’s design of the Numerical Control plane grind. For the grinding

process developing, the grinder has a quite proportion in the machine tool. The grinding process and the grinder have a very

important place in the machine manufacturing. In a word, grinding process has a high speed for develop.
The paper consists of preface, general layout design, the design of grinding head, the design of vertical feed, designing for

numerical (NC) system, the tiny displacement workbench structure, conclusion and compliment.
The preface introduces the background of flat surface grinding, its characteristics and its present situation of development

at home and abroad. At the same time, the trend development of flat surface grinding is introduced.
There is a simple introduce for the general layout design and the design of grinding head. And the mostly introduce are the

design of vertical feed ,the tiny displacement workbench structure and the designing for numerical (NC) system.
At last, the conclusion the make a review for the design and make a view for the machine tool manufacture.
Keywords: precision, Numerical Control, plane grind, grinding head

参考文献
1.《机械设计图册》,上海科学技术出版社,1979/06;
2. 任敬心,华定安,《磨削原理》,西北工业大学出版社,1988;
3. 范云涨,陈北年,《金属切削机床设计简明手册》北京:机械工业出版社,1992;
4. 戴曙,《金属切削机床》,机械工业出版社,1995/10;
5. 濮良贵,纪名刚,《机械设计》 北京:高等教育出版社,1996;
6. 曾志新,吕明,《机械制造技术基础在》武汉:武汉理工大学出版社,2001;
7. 孙恭寿,汤锡金,《磨床精华与改造》北京:机械工业出版社,1986;
8. 徐灏,《机械设计手册》北京:机械工业出版社,1991;
9. 冯辛安,《机械制造装备设计》北京:机械工业出版社,1999;
10.《磨床设计制造》上海:上海人民出版社,1983;
11.邓星钟等《机电传动控制》武汉:华中理工大学出版社,1998;
13.《实用机床附件手册》,河南:河南科学技术出版社,2001/02;
14.O’connor JJ, et al.. Standard hankbook of Lubracation Engineering. New 20 O’connor JJ, et al.. Standard hankbook of

Lubracation Engineering. New York:Mcgraw_Hill,1968;
15.W,Brian Rowe, Thermal analysis of efficiency deep grinding. UK. Internation Journal of Machine Tools & Manufacture 41

(2001)1_19.York:Mcgraw_Hill,1968;
16.W,Brian Rowe, Thermal analysis of efficiency deep grinding. UK. Internation Journal of Machine Tools & Manufacture 41

(2001)1_19.

\


查看评论 已有0位网友发表了看法
  • 验证码: