基于ProENGINEER wildfire的粉状物料打散器虚拟装配(完整一套设计,有说明书:论文,图纸)
粉状物料打散器.dwg
振动架.dwg
毕业设计.doc
封面.doc
基于ProENGINEER wildfire的粉状物料打散器虚拟装配.doc
目录.doc
摘要.doc
目 录
摘要…………………………………………………………………………………………Ⅰ Abstract……………………………………………………………………………………Ⅱ 第1章 绪论…………………………………………………………………………………1 1.1 Pro/E的概况………………………………………………………………………1 1.2食品及其工艺过程…………………………………………………………………2 1.3乳品行业的发展前景………………………………………………………………4 1.4奶粉质量的保证措施……………………………………………………………5 第2章 粉状物料打散器所需主要设备 …………………………………………………7 2.1粉状物料打散器的主要设备………………………………………………………7 2.2机体的主要构件……………………………………………………………………7 第3章 机架的设计及钢材的选择…………………………………………………………8 3.1钢材的选择…………………………………………………………………………8 3.2极限设计法………………………………………………………………………9 3.3机架的焊接、制造及检验要求…………………………………………………10 3.4设计应注意的几个问题…………………………………………………………13 3.5焊条的选用原则…………………………………………………………………13 3.6对材料的要求……………………………………………………………………14 3.7制造公差要求……………………………………………………………………15 3.8容器的设计(进、卸料抖)………………………………………………………16 第4章 机械设计原则……………………………………………………………………18 4.1表面粗糙度………………………………………………………………………18 4.2连接要求…………………………………………………………………………18 4.3槽、角及圆角的半径……………………………………………………………18 4.4其他要求…………………………………………………………………………19 4.5制造产品接触表面的结构材料…………………………………………………19 4.6设备结构的安全卫生性…………………………………………………………19 第5章 Pro/Engineer Wildfire软件介绍……………………………………………21 5.1真实3D模型 ……………………………………………………………………21 5.2以特征作为设计的单位…………………………………………………………22 5.3单一数据库……………………………………………………………………22 5.4 参数式设计………………………………………………………………………22 第6章 利用Pro/ENGINEER Wildfire进行三维实体设计………………………………24 6.1 草绘截面的建立…………………………………………………………………24 6.2 基准特征的建立…………………………………………………………………24 6.3 实体特征的建立…………………………………………………………………26 第7章 在Pro/ENGINEER Wildfire下进行虚拟装配……………………………………29 7.1 简介Pro/ENGINEER wildfire虚拟装配……………………………………29 7.2简介Pro/ENGINEER wildfire装配类型…………………………………………29 第8章 装配实体生成工程图………………………………………………………………32 结论 ………………………………………………………………………………………34 致谢…………………………………………………………………………………………35 参考文献……………………………………………………………………………………36
摘 要
粉状物料打散器是用于食品加工行业,主要是乳品加工粉状物料打散器的主要设备:振动电机P=0.75kw,气缸行程为
600mm,气缸工作压力大于0.5Mpa,本设计根据乳品生产制造的设计参数与使用要求和机械设计的相关知识确定整机的设
计方案。另外,我用Pro/ENGINEER软件在计算机上画出了各零部件的三维实体图,并且将它们装配在了一起,在计算机
中能够直观地看到我所设计的粉状物料打散器的空间布局。整体工程图是通过PRO/ENGINEER软件生成后导入CAD中出的
图。 关键词:打散装置;虚拟装配;工程图 Pro /Engineer wildfire
Abstract
Whether powdery supplies person who break up for the use by food processing industry, it is dairy
products that process powdery capital equipment, supplies of breaking up device mainly. Vibration
electrical machinery P =0.75kw, the journey of the air cylinder is 600mm, the working pressure of the
air cylinder is greater than 0.5Mpa, originally design the design parameter , instructions for use and
design plan of confirming the complete machine of relevant knowledge that is designed of machinery
manufactured according to the dairy products. In addition, I draw the three-dimensional entity's picture
of every spare part on the computer in Pro/ENGINEER software, and assemble them together, can see the
powdery supplies breaking up device space overall arrangement that I design jocularly in the computer.
The whole project picture is channelled into the picture published in CAD after being turned into
through PRO/ENGINEER software.
Keyword: Break up the device ; Assemble fictitiously;Project picture;Pro/Engineer wildfire
参考文献
[1]成大先.《机械设计手册》全卷:化学工业出版社, 1991 [2]濮良贵,纪名刚.《机械设计》:高等教育出版社, 2001 [3]武建新.《乳品技术装备》:中国轻工业出版社, 2000 [4]成大先.《机械设计图册》:化学工业出版社, 2000 [5]王中刚,张秀亲,苗淑杰.《机械设计实践》:哈尔滨工业大学出版社, 2003 [6]姜俊杰,《Pro/ENGINEER Wildfire高级实例教程》中国水利水电出版社 2005 [7]白晶,陶春生,张云杰.《Pro/ENGINEER Wildfire零件设计基础篇》: 清华大学出版社, 2005 [8]洪立群,黄圣杰.《Pro/ENGINEER Wildfire 工程图制作》:中国铁道出版社,2004 [9]詹友刚.《Pro/ENGINEER英文野火版教程—零件设计范例》:清华大学出版社,2005
|