绢花主枝杆注塑模设计(完整一套设计,有说明书:论文,图纸)
A0绢花主枝杆模具装配图.dwg
A1动模板.dwg
A1上模板.dwg
A1下模板.dwg
A2哈夫块.dwg
A3导滑板.dwg
A3塑件图完整版.dwg
A4浇口套零件.dwg
A4条形导块零件.dwg
任务书.doc
说明书.doc
目 录 目 录……………………………………………………………………………………………1 中英文摘要………………………………………………………………………………………..2 第1章 绪论……………………………………………………………………………………...3 1. 1 塑料成型模具在加工工业中的地位……………………………………………….. 4 1. 2 塑料成型模具发展趋势…………………………………………………………….. 4 第2章 软件简介……………………………………………………………………………….. 5 2. 1 总装配图的建立(AutoCAD)…………………………………………………….. 5 2. 2 零件模型设计(Pro/E)………………………………………………………………5 2. 3 零件模型加工(Mastercam)………………………………………………………...5 第3章 零件材料选择及性能…………………………………………………………………...6 第4章 注射机的选择…………………………………………………………………………7 4. 1 注射量确定……………………………………………………………………………7 4. 2 锁模力确定…………………………………………………………………………….7 4. 3 成型压力确定………………………………………………………………………….8 第5章 塑料注射成型模具的设定……………………………………………………………...8 5. 1开模行程L确定…………………………………………………………………………8 5. 2模具侧壁厚度计算……………………………………………………………………….9 5. 3模具侧壁厚度校核……………………………………………………………………….9 5. 4动模板厚度确定………………………………………………………………………...10 5. 5哈夫块主要尺寸的计算………………………………………………………………10 第6章 其它零部件的设计设计………………………………………………………………12 6. 1 浇口形式………………………………………………………………………………12 6. 2 浇口尺寸计算………………………………………………………………………..13 6. 3 导柱的选择……………………………………………………………………………14 6. 4 导套的选择……………………………………………………………………………14 6. 5 模板的选择……………………………………………………………………………14 6. 6 导滑块的设计…………………………………………………………………………15 6. 7 导滑板的设计…………………………………………………………………………15 第7章 成型零部件设计……………………………………………………………………….16 7.1 型腔分型面设计………………………………………………………….…….…….16 7.2 排气槽设计…………………………………………………………………………...16 7.3 成型零件设计………………………………………………………………………...16 第8章 侧向分型机构设计……………………………………………………………………17 第9章 复位机构与导向机构设计…………………………………………………………….18 9.1 复位机构设计……………………………………………………………………….18 9.2 导向机构设计……………………………………………………………………….18 鸣谢及参考文献………………………………………………………………………………….19 设计总结………………………………………………………………………………………….20
中英文摘要 摘要: 文本主要介绍CAD/CAM在模具上的应用,包括PEO/E,AUTOCAD,MASTERCAM。机械部分的设计,内容包括塑料绢花主枝杆注
塑模具的工作原理及应用、设计准则,以及产品的简介。塑料注塑模的设计计算,包括模具结构设计,注塑机的选用,
浇注系统的设计等方面。 关键词: CAD/CAM,塑料,注塑模,注塑机, 绢花主枝杆 。 Abstract: In this paper ,it is about the application of the CAD/CAM in plastic injection mould ,it include
PRO/E,AUTOCAD,MASTERCAM. It is about the working theory and application of a pole of the false flower
plastic injection mould, the design princible, and the introduction of production, and the design
calculation of the plastic mould . Includes the structure design of the mould, the selecting of plastic
injection mould machine, and the pour system design, and so on. Key Words: Plastic Injection Mould, Plastic Injection Mould Machine. the main pole of the false flower
参考文献: [1] 现代模具制造技术 金涤尘 主编 机械工业出版社 [2] AutoCAD 2002 工程开发实例教程 张帆 王华杰等 编写 北京希望电子出版社 [3] Pro/ENGINEER i2 林清安 编著 清华大学出版社 [4] 模具设计与制造 党根茂 骆志斌 周小玉 主编 机械工业出版社 [5] 模具设计与制造简明手册 (2001.05 第二版)韩泰荣 编 [6] 塑料模具设计 陈志刚主编(2002.01 出版 [7] 实用注塑模具设计 97.07出版 [8] 塑料注射模具设计实用手册 宋玉恒主编 1994.8 出版 [9] 机械零件手册 周开勤 主编 高等教育出版社 [10] 注塑模具典型结构100例 蒋继宏 王效岳 编 中国轻业出版社 [11] 塑料注射模具设计计算简明手册 张荫郎编著 1995.9出版 [12] 塑料实用手册
|