您现在的位置:网站首页答辩论文工学论文电子论文

直流稳定电源的设计

  • 简介:摘  要:随着科技的发展,电气、电子设备已经广泛的应用于日常、科研、学习等各个方面。电源作为电气、电子设备必不可少的能源供应部件,需求日益增加,而且对电源的功能、稳定性等各项指标也提出了更高的要求。对电
    类型:word    页数:44    字数:19765    价格:150   
  • 论文简介
  • 相关论文
  • 论文下载

  随着科技的发展,电气、电子设备已经广泛的应用于日常、科研、学习等各个方面。电源作为电气、电子设备必不可少的能源供应部件,需求日益增加,而且对电源的功能、稳定性等各项指标也提出了更高的要求。对电源的研究和开发已经成为新技术、新设备开发的重要环节,在推动科技发展中起着重要作用。本设计分别用串联型线性稳压电路,串联调整式稳流电路和反馈式逆变电路设计直流稳压电源,直流稳流电源和DC-DC变换器。通过相关知识计算出各电路中各个器件的参数,使电路性能达到设计要求中的电压调整率,电流调整率,负载调整率,纹波电压等各项指标。

 

关键词:电源;串联型线性稳压;串联调整式稳流;反馈式逆变电路

 

The Design Of Stabile Direct Current Power Supply

Abstract: Along with technical development, the electricity and electronic instruments have already been widespread applied in daily, scientific research, study and so on each aspect. Since the power supply takes the essential energy-supply part of electrical and electronic instruments, its demand increases day by day, and also been set a higher request to function, stability and so on each target. The power supply research has already become the important link to the development of the new technology and the new equipment. It’s playing the vital role in the impetus of science and technology development. This design separately uses series linear constant voltage circuit, series regulate constant current circuit and the feedback type contravariant circuit to design direct current constant voltage power supply, direct current constant current power supply and DC-DC converter. We must calculate various each component parameter in the circuits by correlated knowledge and enable the circuit performance to meet in the design requirements such as the voltage regulation rate, the current regulation rate, load regulation rate, ripple voltage and so on.

 

Key Words: Power Supply; Series Linear Constant Voltage; Series Regulate Constant Current; Feedback Type Contravariant Circuit.


 

 

   

 

0     ... 1

1 直流稳压电源... 2

1.1 直流稳压电源设计课题分析... 2

1.1.1 设计要求分析... 2

1.1.2 稳压电源的三个质量指标... 2

1.1.3 确定设计方案... 5

1.2 串联反馈调整型稳压电源的基本原理... 5

1.3 串联反馈调整型稳压电源设计方法... 7

1.3.1 电路选择... 7

1.3.2 确定对整流滤波电路的要求... 8

1.3.3 调整管的选择... 9

1.3.4 计算取样电阻... 10

1.3.5 确定基准电压... 11

1.3.6 设计比较放大器... 11

1.3.7 验算核实(计算稳压系数和输出电阻)... 12

1.4 参数计算和器件选择... 14

1.4.1 设计要求... 14

1.4.2 选择电路... 14

1.4.3 确定对整流滤波电路的要求... 15

1.4.4 选样复合调整管... 15

1.4.5 基准电压电路的选定... 15

1.4.6 取样电路的计算... 16

1.4.7 比较放大电路计算... 16

1.4.8 电容器ClC3的选定... 16

1.4.9 验算核实(计算稳压系数与输出电阻) 17

2 直流稳流电源... 18

2.1 直流稳流电源设计课题分析... 18

2.2 串联调整型稳流电源工作原理... 19

2.2.1 串联调整型稳流电源的原理... 19

2.2.2 稳流电源的两个重要性能指标... 22

2.3 串联调整型稳流电源设计方法... 22

2.3.1 确定取样电阻Rs经验公式... 22

2.3.2 计算基准电压 ........ 23

2.3.3 选择输入电压 .... 23

2.3.4 选择调整管... 23

2.3.5 输出电流的调整... 24

2.3.6 输入电压最大纹波幅度的计算... 24

2.3.7 计算放大器的电压增益 ...... 24

2.4 参数计算和器件选择... 26

2.4.1 设计要求... 26

2.4.2 设计和计算... 26

3 DC-DC 变换器... 28

3.1 DC-DC变换器设计课题分析... 28

3.2 DC-DC变换器的基本原理... 29

3.3 确定双管谐振式DC-DC变换器方案... 31

3.4 参数计算和器件选择... 32

4 结束语... 33

参考文献... 34

    ... 35

    ... 36

附录1 直流稳定电源电路原理图... 37

附录2 元器件目录表... 38

 


 

参考文献

[1]  曲学基,王增福. 稳定电源电路设计手册[M]. 北京:电子工业出版杜,2003.

[2]  康华光,陈大钦. 电子技术基础(模拟部分)[M]. 北京:高等教育出版社,2002.

[3]  本书编委会.新编中国半导体器件数据手册[M]. 北京:电子工业出版社,2001. 

[4]  李成章. 现代化电源及电路图案[M]. 北京:电子工业出版社,2004.

[5]  (美)服杂志社. 电子线路设计手册[M]. 北京:国防工业出版社,2002.

[6]  (美)JD林肯. 电子电路设计手册[M]. 北京:科学普及出版社,2000.

[7]  张惠,冯英. 电源大全[M]. 成都:西南交通大学出版社,2003.

[8]  李爱文,张承藏. 现代逆变技术及其应用[M]. 北京:科学出版社,2000.

[9]  沙占友等. 特种集成电源最新应用技术[M]. 北京:人民邮电出版社,2002.

[10] 童诗白. 模拟电子技术基础[M]. 北京:人民教育出版社,2001.

 

 
查看评论 已有0位网友发表了看法
  • 验证码: