您现在的位置:网站首页答辩论文工学论文机械论文

毕业设计 物料提升机的设计与分析

  • 简介:毕业设计-物料提升机的设计与分析,共59页,23296字,附设计图纸、任务书,一、主要内容及基本要求,物料提升机是在带式输送机的基础上发展而来,其特点是承载物料的输送带式传递动力的牵引件,其承载力相对要求较小,具有结构简单、送料
    类型:word+autocad    页数:59    字数:23296   
    资料包括:论文 图纸 任务书   
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载
文件大小:2.59MB
适用专业:机械设计制造及其自动化
适用年级:大学
论文编号:209360

论文简介:

毕业设计-物料提升机的设计与分析,共59页,23296字,附设计图纸、任务书
一、主要内容及基本要求
物料提升机是在带式输送机的基础上发展而来,其特点是承载物料的输送带式传递动力的牵引件,其承载力相对要求较小,具有结构简单、送料范围广泛和运送量大以及运距长等特点,在国民经济中是不可缺少的关键设备。物料提升机主要由驱动装置、传动滚筒、改向滚筒、压辊、从动辊、及机架等几部分组成。其中驱动装置是物料皮带机的动力来源,由电动机、减速器和间歇机构组成;采用同步带轮作为主动轮同步带轮与驱动装置相连,从动辊也采用同步带轮。
物料提升皮带机的设计要求;
1. 提升高度:1200mm
2. 输送量3000块/小时;
3. 工步:50步/分钟。
具体要求:
1) 每走一工步:1.2秒2)动停比 1/3; 3)每个挡板间距:100mm; 4)带速:0.7m/s
要求设计该物料提升机的结构,计算与校核相关零部件强度,采用Solidworks进行三维实体建模和装配,形成若干A0-A4工程图纸和字数8000字以上的设计报告。
二、重点研究的问题
改向滚筒的结构设计,改向滚筒轴的强度校核,改向压轮的结构设计,托辊的结构设计内容。


摘 要
提升机是一种实现工程物料向上运输的机械,它是当代最为得力的输送设备之一,它广泛运用于矿山、码头、化工等各种场合,但是不同的工况下它对设备的要求是不同的。
本文以食品加工业为背景,设计提升食品的机械。物料提升皮带机是在带式输送机的基础上发展起来的。物料提升皮带机与传统的带式输送机一样是以胶带、钢带、钢纤维带、塑料带和化纤带等作为传送物料和牵引工件的输送机械。其特点是承载物料的输送机也是传递动力的牵引件,这与其他输送机械有着显著的区别。本次设计的物料提升皮带机是一种小型的运输机械,其承载能力要求较小,相对于其他的带式输送机成本要求低,设计结构紧凑。
本设计从整体结构出发,对整个装置中的驱动部分和传动部分进行了设计与计算。其中在驱动装置的设计与计算中,本设计选择电机—减速器的装置来作为驱动设备;而在传动部分的设计中,本设计选择了同步带轮与驱动装置相连,从而传递动力。本文另外还对装置中的改向滚筒、压辊及托辊部分进行了选择设计,同时对其他的辅助设备也做了必要的计算和选择。
本设计主要设计减速器的结构,确定了内部各传动齿轮以及轴的各主要参数,以及改向滚筒的设计,并对其工作原理作了详细分析。
关键词:减速器;改向滚筒;压轮;托辊
Abstract
The elevator is one kind of realization project material upward transportation machinery, it is one of contemporary most efficient conveyors, it widely utilizes in the mine, the wharf, the chemical industry and so on each kind of situation, but under the different operating mode it to the equipment request is different.
This article take food processing industry as the background, the design promotion food machinery.Food promotion belt fastener is develops in the belt conveyer foundation.Food promotion belt fastener and the traditional belt conveyer is equally by the adhesive tape, the steel belt, the steel textile fiber belt, the plastic tape and the chemical fiber belt and so on takes the transmission material and the hauling work piece transportation machinery.Its characteristic is the load bearing material conveyer also is transmits the power the hauling, this and other transportation machinery has the remarkable difference.This design food promotion belt fastener is one kind of small transport machinery, its bearing capacity request is small, is opposite requests lowly in other belt conveyer cost, the design structure is compact.
This design embarks from the overall construction, has carried on the design and the computation to in the entire installment actuation part and the transmission part.In which in the drive design and the computation, this design choice electrical machinery - reduction gear installment took actuates the equipment; But in the transmission part design, this design has chosen the synchronized band pulley and the drive is connected, thus transmission power.This article other also to in installment changing to the drum, the drag roll and the supporting roller part has carried on the choice design, simultaneously has also made the essential computation and the choice to other supporting facilities.
This design mainly designs the reduction gear the structure, had determined the interior various transmission gear as well as axis each main parameter, as well as changes to the drum design, and has made the multianalysis to its principle of work.
Key words:Reduction gear; Changes to the drum; Pressure roller; Supporting roller


目 录
摘要: I
Abstruct II
第1章 绪论 1
1.1 前言 1
1.1.1 背景介绍 1
1.1.2 运输机简介 1
1.1.3 物料提升皮带机简介 4
1.2 方案确定 5
1.3 设计方案综述 6
第2章 减速器结构的设计 7
2.1 电动机的选择 7
2.1.1 选择电动机类型和机构形式 7
2.1.2 功率的计算 7
2.1.3 电动机功率的选择 7
2.2.4 确定电动机的转速 8
2.2 计算传动装置的总传动比和分配各级传动比 8
2.2.1 总传动比 8
2.2.2 分配各级传动比 8
2.3 传动装置的运动和动力参数 9
2.3.1 各轴转速 9
2.3.2 各轴的输入功率 9
2.3.3 各轴的输入转矩 9
2.4 V带的设计 10
2.4.1 确定计算功率 10
2.4.2 选择带型 10
2.4.3 确定带的基准直径和 10
2.4.4 确定中心距a和带轮的基准长度 10
2.4.5 验算小带轮上包角 11
2.4.6 确定带的根数 11
2.4.7 确定预紧力 11
2.4.8 计算带传动在轴上的力 12
2.4.9 误差验算 12
2.4.10 带轮设计 12
2.5 高速级齿轮设计 12
2.5.1 选齿轮的类型、精度等级、材料及齿数 12
2.5.2 按齿面接触强度设计 12
2.5.3 按齿根弯曲强度设计 14
2.5.4 几何尺寸计算 15
2.5.5 验算 16
2.5.6 齿轮结构设计 16
2.6 低速级齿轮的设计尺寸 16
2.7 轴的设计 17
2.7.1 初步确定轴的最小直径 17
2.7.2 轴的结构设计 18
2.8 轴的校验 20
2.9 键的选择与校核 26
2.10 滚动轴承的选择与校核 27
第3章 间歇机构 29
3.1 槽轮机构 29
3.1.1 槽轮机构的组成及工作特点 29
3.1.2 槽轮机构的类型及应用 29
3.1.3 槽轮机构的运动系数及运动特性 29
3.2 棘轮机构 30
第4章 改向滚筒的设计 31
4.1 改向滚筒的结构设计 31
4.2 改向滚筒轴的强度校核 31
第5章 改向压轮的设计 35
5.1 改向压轮的结构设计 35
5.2 设计方案的比较与选择 36
5.3 输送带的跑偏处理 37
5.4 拉紧装置 38
第6章 托辊的设计 40
6.1 托辊的类型 40
6.2 托辊的设计计算 41
第7章 物料提升皮带机的安装和操作维护 44
7.1 启动和停机 44
7.2 物料提升皮带机的维护 44
7.3 物料提升皮带机的安装 44
结论 46
参考文献 47
致谢 48


论文文件预览:
共4文件夹,9个文件,文件总大小:2.59MB,压缩后大小:1.22MB

  • 毕业设计-物料提升机的设计与分析
  • 22 物料提升皮带机设计
  • 廖鑫
  • 廖鑫
  • dwgA0减速器装配图.dwg  [173.50KB]
  • dwgA0总装配图.dwg  [152.28KB]
  • dwlA0总装配图.dwl  [38.00B]
  • dwl2A0总装配图.dwl2  [191.00B]
  • dwgA1压带轮装置.dwg  [148.50KB]
  • dwgA1改向滚筒.dwg  [115.13KB]
  • dwgA1皮带轮.dwg  [116.09KB]
  • dwgA1轴.dwg  [131.62KB]
  • doc物料提升皮带机设计.doc  [1.78MB]

查看评论 已有0位网友发表了看法
  • 验证码: