您现在的位置:网站首页答辩论文工学论文机械论文

毕业设计 摩擦磨损试验机设计

  • 简介:毕业设计-销盘式高温高速摩擦磨损试验机机械结构设计,共40页,17452字,附设计图纸、外文翻译,摘要:摩擦学是一门实践性很强的应用科学,在国内的相关研究中广泛使用的试验机有滚子式磨损试验机、四球式摩擦磨损试验机、往复式摩擦磨
    类型:word+autocad    页数:40    字数:17452   
    资料包括:论文 图纸 外文翻译   
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载
文件大小:5.34MB
适用专业:机械设计制造及其自动化
适用年级:大学
论文编号:209258

论文简介:

毕业设计-销盘式高温高速摩擦磨损试验机机械结构设计,共40页,17452字,附设计图纸、外文翻译
摘要:摩擦学是一门实践性很强的应用科学,在国内的相关研究中广泛使用的试验机有滚子式磨损试验机、四球式摩擦磨损试验机、往复式摩擦磨损试验机、切人式摩擦、磨损试验机、盘销式摩擦磨损试验机等。摩擦磨损试验的目的是为了对摩擦磨损现象及其本质进行研究,正确地评价各种因素对摩擦磨损性能的影响,从而确定符合使用要求的摩擦副元件的最优参数。高温高速摩擦磨损试验机是进行高温高速摩擦磨损试验的有效设备,广泛运用于对各种高速刀具的高温摩擦磨损性能进行测试和评价,是高速切削和新型刀具材料研制开发和应用的必备设备。该设备是高速加工和刀具材料研究方向研究工作急需的基础设备,该设备可以扩展该学科的研究领域和提高研究水平。
关键词:摩擦、试验机、高温、高速


High-temperature high-speed friction tester
Abstract: Friction is a very practical application of scientific research in China is widely used in a roller-type testing machine abrasion tester, four-ball friction and wear tester, reciprocating friction and wear test machine, cutting people friction and wear test machine, disc pins and other friction and wear test machine. The purpose of friction and wear tests on the friction and wear in order to study the phenomenon and its essence, the correct assessment of the various factors on the friction and wear properties to determine compliance requirements of the friction pair components using the optimal parameters. High temperature friction and wear tester is heat-efficient high-speed friction and wear test equipment, widely used in various high temperature friction and wear properties of tool to test and evaluation, and new high-speed cutting tool material developed and applied the necessary equipment . The device is a high-speed machining and cutting tool material research studies needed infrastructure, the device can be extended to the subject of basic research and research level.
Key words: friction testing machine, high temperature, high-speed


目录
第一章 绪论 2
1.1本课题研究的目的和意义 2
1.2国内外研究概况 3
1.3 发展趋势 9
1.4 小结 9
第二章 摩擦磨损试验机的影响因素 10
2.1试验条件的影响; 10
2.2、试验负荷的影响; 13
第三章 方案设计、分析与比较 16
3.1 试验机的整体分析 16
3.2 设计方案的制定 16
3.3 方案比较 20
第四章 摩擦磨损试验机结构设计的有关计算 22
4.1、试验机的主要性能指标的确定 22
4.2试验机的主传动系统的有关计算 22
4.2.1电机的选择: 22
4.2.2同步带传动的计算: 24
4.2.3主轴计算: 28
4.2.4、主轴上键的强度校核: 30
4.2.5、横梁的强度校核: 30
4.2.6、丝杠螺母副的相关计算: 30
4.2.7、轴承的校核: 31
第五章 摩擦磨损试验机的结构设计 35
5.1、磨损试验机的整体结构 35
5.2、箱体的结构设计 36
5.3、横梁的设计 36
5.4、支架的设计: 37
5.5、摩擦销的结构设计: 38
5.6、摩擦盘夹持器的设计: 38
第六章 总 结 39
参考文献 40
附录:外文翻译 41


本设计主要对销盘式高温高速摩擦磨损试验机进行机械结构部分的设计与计算机三维实体造型以及二维图的绘制。所设计的试验机满足下面的性能要求:
(1)主轴转速范围0~3000 r/min,无级调速;
(2)工作的最高温度1000 ℃;
(3)加载范围:0~20 N,采用砝码加载;
(4)样品盘最大尺寸为Φ80 mm,最大厚度10 mm。
本设计要求设计出实现上述要求的较为合理的方案,并进行相关计算。最后对整个试验机进行机械结构设计,用AutoCAD绘制整个试验机的二维图。


论文文件预览:
共2文件夹,9个文件,文件总大小:5.34MB,压缩后大小:1.51MB

  • 毕业设计-摩擦磨损试验机设计
  • 9 摩擦磨损试验机
  • dxfA0-总装配图.dxf  [1.38MB]
  • dxfA1-箱体.dxf  [402.89KB]
  • dxfA2-丝杆螺母副传动部分.dxf  [568.54KB]
  • dxfA3-主轴.dxf  [372.48KB]
  • dxfA3-带轮.dxf  [339.64KB]
  • dxfA4-支架.dxf  [351.44KB]
  • dxfA4-横梁.dxf  [407.32KB]
  • doc翻译.doc  [58.50KB]
  • doc说明书.doc  [1.52MB]

查看评论 已有0位网友发表了看法
  • 验证码: