您现在的位置:网站首页答辩论文工学论文机械论文

毕业设计 颗粒分料机设计

  • 简介:毕业设计-颗粒分料机设计,说明书共28页,9515字,附任务书、设计图纸、三维图集,摘要:为了提高加工效率,本课题设计了一种出料粒度为15~20mm的颗粒分料机,根据要求设计了锤击部分和反击部分。 物料由进料口进入破碎腔,经过锤头的冲击
    类型:word+AutoCAD    页数:28    字数:9515   
    资料包括:论文 图纸 任务书   
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载
文件大小:5.16MB
适用专业:机械设计
适用年级:大学
论文编号:202573

论文简介:
毕业设计-颗粒分料机设计,说明书共28页,9515字,附任务书、设计图纸、三维图集
摘要:为了提高加工效率,本课题设计了一种出料粒度为15~20mm的颗粒分料机,根据要求设计了锤击部分和反击部分。 物料由进料口进入破碎腔,经过锤头的冲击、剪切、劈碎、折断,实现物料的中碎;锤击的物料冲击到安装在破碎腔内的反击板上,又经过物料与反击板、物料与物料的互相冲击,从而实现了物料的细碎。本机融合了锤式分料机、反击式分料机与颗粒分料机的优点,降低了生料和熟料的入磨粒度,较好地达到了设计要求。
关键词:分料机;反击板;锤头
The designe of Vertical spindle type breaker
Abstract: In order to enhance the processing efficiency, this topic has designed one kind of material granularity is 15 ~ 20mm vertical spindle type breaker, according to requested to design has hammered the part and the counter-attack part. The material by enters the broken cavity, after the hammer head impact, cuts, chops into pieces, breaks off, the realization material center is garrulous; Hammers the material attacks installs in the broken cavity on the counter-attack board, also passes through the material and the counter-attack board, the material and the material mutual impact, thus has realized the material fragmentation. This machine fused the hammer type breaker, the counter-attack type breaker and the vertical spindle type breaker merit, reduced the crude material and the chamotte enters rubs the granularity, has met the design requirements well.
Keywords: breaker; counter-attack board; hammer head

目录
1前言…1
2概述………..2
3 总体方案论证.5
4 颗粒分料机的总体设计…….6
5 颗粒分料机主要参数的确定………9
6 相关零件的设计..22
7 辅助零件的设计……….23
8 结论 ….25
参考文献…….26
致谢….27

技术参数为:
1.进料粒度 <150mm
2.出料粒度 <10mm
3.转子直径 1000mm
3. 生产能力 25-30t/h


论文文件预览:
共2文件夹,23个文件,文件总大小:5.16MB,压缩后大小:3.41MB

  • 毕业设计-颗粒分料机设计
  • 颗粒分料机
  • dwg装配图.dwg  [387.89KB]
  • dwg制动器.dwg  [215.20KB]
  • dwg制动盘.dwg  [55.99KB]
  • doc摘要.doc  [25.00KB]
  • dwg压盘.dwg  [102.44KB]
  • doc三维图集.doc  [1.86MB]
  • doc目录.doc  [20.50KB]
  • dwg密封盖.dwg  [76.50KB]
  • dwg门.dwg  [84.64KB]
  • dwg料斗.dwg  [56.70KB]
  • dwg壳体.dwg  [105.94KB]
  • dwg进料斗.dwg  [78.22KB]
  • dwg花键轴.dwg  [58.85KB]
  • dwg反击板.dwg  [65.89KB]
  • dwg定位齿块.dwg  [49.65KB]
  • dwg差速锁摇臂轴.dwg  [68.98KB]
  • doc毕业设计说明书.doc  [1.17MB]
  • doc毕业设计任务书.doc  [214.00KB]
  • dwgN底座.dwg  [124.11KB]
  • dwg4方头螺栓.dwg  [69.07KB]
  • dwg3盖子.dwg  [121.51KB]
  • dwg2隔板.dwg  [86.07KB]
  • dwg1转子.dwg  [102.56KB]

查看评论 已有0位网友发表了看法
  • 验证码: