您现在的位置:网站首页答辩论文工学论文机械论文

毕业设计 液压缸总体及主缸设计

  • 简介:中文题目:液压缸总体及主缸设计,外文题目:DESIGN OF HYDRAULIC PRESS AND MAIN CYLINDER,毕业设计(论文)共 55 页,26274字(其中:外文文献及译文15页) 图纸共2张,附开题报告及实习报告,摘要,液压压力机是一种用静压力来加工金属,...
    类型:word+exb    页数:15    字数:26274   
    资料包括:论文 图纸 开题报告   
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载
文件大小:1.10MB
适用专业:机械设计及其自动化
适用年级:大学
论文编号:198810

论文简介:
中文题目:液压缸总体及主缸设计
外文题目:DESIGN OF HYDRAULIC PRESS AND MAIN CYLINDER
毕业设计(论文)共 55 页,26274字(其中:外文文献及译文15页) 图纸共2张,附开题报告及实习报告
摘要
液压压力机是一种用静压力来加工金属,塑料,橡胶,粉末制品的机械,在许多工业部门得到了广泛应用。压力机的类型很多,其中四柱式液压压力机最为典型,应用也最为广泛。这种液压压力机在它的四个主柱之间安置着上,下两个液压缸,液压压力机对其液压系统的基本要求是:
为完成一般的压制工艺,要求主缸(上液压缸)驱动上滑块能实现“快速下行→慢速加压→保压延时→快速返回→原位停止”的工作循环;要求顶缸出缸(下液压缸)驱动下滑块实现“向上顶出→停留→原位停止”的动作循环。
液压系统中的压力要能经常变换和调节,并能产生较大的压制力(吨位),以满足工作平稳性和安全可靠性要高。
流量大、功率大、空行程和加压程行程的速度差异大。因此要求功率利用合理,工作平稳性和安全可靠性要高。
液压机的主缸是液压机液压系统的主要动作执行部件,它的结构、材料、及尺寸的大小的选择直接影响到液压机的工作性能。因此在液压机上,液压缸的选择是至关重要的。而液压机主缸的设计计算是在已知液压机压力,液压机工作行程,工作台尺寸,活动横梁的运动速度等条件下进行的。
关键词:液压机;主缸;材料;横梁;行程
Abstract
A hydraulic press is used to process the static pressure of metal, plastic, rubber and powder products, the machinery, In many industrial sectors to be widely used. There are many types of presses, hydraulic presses frame of the most typical applications are most widely used. This Hydraulic Press in its four main columns with resettlement between the upper and lower two hydraulic cylinders, Hydraulic presses its hydraulic system of the basic requirements are :
For the completion of the general process of repression, asked master cylinder (cylinder) driver on the slider to achieve "rapid downlink → slow compression → Bao calendar when → rapid return to the original → stop "work cycle; request from the top tank cylinder (cylinder) slider driven to achieve "upward from the top → stay in situ stop" the cycle of action.
Hydraulic system pressure to constant transformation and regulation, and lead to greater repression of (tonnage). work steadily to meet the security and reliability higher.
Flow, power, air pressure-trip itinerary and the speed is great. Therefore requested the use of reasonable power, a smooth and high reliability.
Hydraulic machine is the main hydraulic cylinder hydraulic system moves the implementation of the major components, its structure, materials, The size and the choice of a direct impact on the hydraulic performance. So in hydraulic machine, hydraulic cylinder choice is crucial. And the main hydraulic cylinder design is known in the hydraulic pressure, hydraulic machine journeys table size, Campaign activities beams of speed under the conditions.
Key words : Hydraulic; Master cylinder; Materials; Beam; Trip
目录
前言……1
绪论……2
1.1液压机概述……… 2
1.1.1国内液压机技术发展情况……………2
1.2液压机的工作原理…3
1.2.1液压系统的传动方式—泵直接传动4
1.2.2液压机的特点及分类5
1.2.3 液压成型机主要技术参数……………7
2液压机结构设计………11
2.1液压机各部件之间的结构关系及结构形式……………11
2.2横梁的结构设计……12
2.3立柱.………………15
2.3.1立柱的受力分析……15
2.3.2立柱螺母……………16
2.3.3 四柱式组合机架的预紧与放松……17
2.3.4 立柱导套…………18
2.4顶出缸的设计……18
3液压机主缸设计………22
3.1主缸型式选择………22
3.2液压缸的典型结构…23
3.3液压机的主缸结构设计………………23
3.4液压缸的参数选取24
3.5液压缸主要部件设计计算……………25
3.5.1缸筒………………25
3.5.2活塞29
3.5.3活塞杆………………31
3.6导向套的密封与防尘………………33
3.6.1导套……………33
3.6.2密封………………33
3.6.3导向套长度的确定…34
3.7液压机的振动及减振措施……………35
3.7.1液压机的振动………35
3.7.2液压机的减振措施…35
4结论…38
致谢……39
参考文献40
附录A 译文……………41
附录B外文文献………47


论文文件预览:
共4文件夹,8个文件,文件总大小:1.10MB,压缩后大小:330.22KB

  • 毕业设计-液压缸总体及主缸设计
  • 张铮=液压缸总体及主缸设计
  • 图纸
  • exbzhang.exb  [118.77KB]
  • exbzz.exb  [123.16KB]
  • 论文
  • doc内封 Microsoft Office Word 文档.doc  [12.68KB]
  • doc实习报告.doc  [33.50KB]
  • doc开题报告.doc  [48.50KB]
  • doc摘要.doc  [25.50KB]
  • doc正文.doc  [733.00KB]
  • doc目录.doc  [32.00KB]

查看评论 已有0位网友发表了看法
  • 验证码: