您现在的位置:网站首页答辩论文工学论文机械论文

毕业设计 液压支架总体及平衡液压缸设计

  • 简介:中文题目:液压支架总体及平衡液压缸设计,外文题目:HYDRAULIC SUPPORT TOTALITY AND BALANCE CYLINDER DESIGN,毕业设计(论文)共78页,32801字(其中:外文文献及译文25页) 图纸共2张,附开题报告及实习报告,摘要,煤是工业发展所不可...
    类型:word+exb    页数:78    字数:32801   
    资料包括:论文 图纸 开题报告   
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载
文件大小:1.56MB
适用专业:机械设计及其自动化
适用年级:大学
论文编号:198776

论文简介:
中文题目:液压支架总体及平衡液压缸设计
外文题目:HYDRAULIC SUPPORT TOTALITY AND BALANCE CYLINDER DESIGN
毕业设计(论文)共78页,32801字(其中:外文文献及译文25页) 图纸共2张,附开题报告及实习报告
摘要
煤是工业发展所不可缺少的,它是工业发展的动力也是原料,我国是产煤大国,充分利用这些煤资源可以大力促进我国工业及各方面的发展。为了有效的支护和控制顶板,必须设计出不同类型和不同结构尺寸的液压支架。
参考液压支架方面的相关书籍,通过经验公式的相关计算,并通过计算得到的结果查一些图表和图示。在设计中,大量运用类比法来确定一些尺寸。
通过查阅资料和详细的计算,可以设计出比较合理的掩护式液压支架,其实际支护强度大于理论支护强度。对平衡液压缸的结构和相关尺寸进行计算,并对其进行强度计算,使该液压缸满足液压支架的工作要求。
通过已知的老顶级别、直接顶类型和煤层厚度这些条件,设计出的液压支架能有效的支护和控制顶板。设计出的平衡液压缸使掩护式支架构成稳定结构。
关键词:掩护式;液压支架;四连杆机构;平衡液压缸
Abstract
The coal is the industrial development essential, it is the industrial development power is also raw material, our country produces the coal great nation, uses these coal resources to be possible fully to promote our country industry and various aspects development vigorously. In order to supports and protections the roof frame effectively, must design the different type and the different structure size hydraulic support.
The reference hydraulic support aspect's related books, through empirical formula's related computation, and the result which obtains through the computation look up some graphs and the graphical representation. In the design, determines some sizes massively using the analogism.
Through the consult material and the detailed computation, may design the quite reasonable shield type hydraulic support, its actual supports and protections intensity is bigger than the theory supports and protections intensity. To the balanced cylinder should computation the structure and the correlation size , and carries on the strength calculation to it, causes this cylinder to satisfy hydraulic support's work requirement.
Through known the roof rank, direct roof type and coal layer thickness these conditions directly, designs the hydraulic support can the effective supports and protections and the control roof. Designs the balanced cylinder causes the shield type support constitution stable structure.
Key word:Shield type; Hydraulic support; four bar linkage; balanced cylinder
目录
前言 1
1绪论 2
1.1液压支架的用途 2
1.2液压支架的类型及特点 2
1.2.1支撑式 2
1.2.2掩护式 2
1.2.3支撑掩护式 3
1.3液压支架的架型确定 3
1.4液压支架的动作确定 4
2液压支架的基本结构 5
2.1顶梁 5
2.1.1顶梁及其作用 5
2.1.2顶梁的分类及其特点 5
2.2掩护梁 6
2.2.1掩护梁及其作用 6
2.2.2掩护梁的分类及其特点 6
2.3四连杆机构 6
2.3.1四连杆机构及其形式 6
2.3.2四连杆机构的作用 7
2.3.3四连杆机构的几何特征 7
2.4底座 8
2.4.1底座及其作用 8
2.4.2底座的形式 8
2.5推移装置 9
2.6平衡千斤顶 10
2.6.1工作原理 10
2.6.2平衡千斤顶的作用 10
2.7立柱 10
2.7.1立柱的作用 10
2.7.2立柱的形式及特点 11
2.8侧推千斤顶 11
2.9侧护板 11
2.9.1侧护板及其形式 11
2.9.2侧护板的尺寸确定 12
2.10泵站 12
3液压支架整体结构设计及形式选择 13
3.1支架结构高度确定 13
3.2支架间距 13
3.3底座 13
3.3.1确定底座形式 13
3.3.2底座的长度 14
3.3.3底座的宽度 14
3.4四连杆机构的尺寸确定 14
3.4.1四连杆机构的几何作图方法 14
3.4.2四连杆机构的设计方案 16
3.5顶梁 18
3.5.1顶梁形式的确定 18
3.5.2顶梁的长度 18
3.5.3顶梁的宽度 20
3.6支护强度 20
3.6.1支护强度的定义 20
3.6.2理论支护强度的计算 20
3.7支护面积及支护力的计算 20
3.7.1支护面积的计算 20
3.7.2支护力的计算 21
3.8立柱 21
3.8.1立柱类型的确定 21
3.8.2立柱数 22
3.8.3立柱的支撑方式 22
3.8.4立柱柱窝的位置确定 22
3.8.5立柱的载荷确定 23
3.8.6立柱的设计 23
3.9推移装置形式选择 24
3.10侧推装置的设计 24
3.11平衡液压缸位置的确定 25
3.12实际支护强度的计算 25
4平衡液压缸的设计 28
4.1平衡液压缸结构设计 28
4.1.1液压缸缸筒和缸盖的设计 28
4.1.2液压缸行程计算 34
4.1.3液压缸最小导向长度及相关尺寸的确定 36
4.1.4活塞和活塞杆 36
4.1.5导向、密封和防尘装置的设计 37
4.1.6缓冲装置 38
4.1.7排气装置 39
4.1.8进出油口 39
4.2强度计算 39
4.2.1缸筒和缸盖焊缝的强度计算 39
4.2.2缸筒和缸盖螺纹连接的强度计算 40
4.2.3缸筒壁厚的验算 42
4.2.4活塞杆强度计算 43
5结论 45
致谢 46
参考文献 47
附录A 48
附录B 58
设计的原始数据为:
老顶级别:级;
直接顶类别:1类;
煤层厚度:2.8~3.3米;
平衡液压缸的推力:450KN;
平衡液压缸的拉力:380KN;
液压支架架型选择就是要使液压支架的结构和性能与工作面的顶、底板条件和地质条件相适应。具体选择可根据原煤炭部(81)煤科字第429号文件(见表1—1)进行。


论文文件预览:
共4文件夹,8个文件,文件总大小:1.56MB,压缩后大小:391.53KB

  • 毕业设计-液压支架总体及平衡液压缸设计
  • 杜娜=液压支架总体及平衡液压缸设计
  • 图纸
  • exb平衡液压缸.exb  [119.24KB]
  • exb液压支架总装图.exb  [209.02KB]
  • 论文
  • doc内封.doc  [19.50KB]
  • doc实习报告.doc  [30.50KB]
  • doc开题报告.doc  [33.00KB]
  • doc摘要.doc  [25.50KB]
  • doc正文.doc  [1.09MB]
  • doc目录.doc  [37.00KB]

查看评论 已有0位网友发表了看法
  • 验证码: