您现在的位置:网站首页答辩论文工学论文机械论文

毕业设计 食物垃圾处理器设计

  • 简介:毕业设计-食物垃圾处理器设计,共36页,19108字,附设计CAD图纸23张,本设计依据我国实际情况,研制适合本国的厨房食物垃圾预处理装置——食物垃圾处理器。垃圾处理器的驱动电机和粉碎刀盘为机器的关健部分,直接影响机器的
    类型:word+AutoCAD    页数:36    字数:19108   
    资料包括:论文 图纸   
    • 请与管理员联系购买资料 QQ:5739126
  • 论文简介
  • 相关论文
  • 论文下载
文件大小:4.76MB
适用专业:机械设计制造及自动化
适用年级:大学
论文编号:197050

论文简介:
毕业设计-食物垃圾处理器设计,共36页,19108字,附设计CAD图纸23张
本设计依据我国实际情况,研制适合本国的厨房食物垃圾预处理装置——食物垃圾处理器。垃圾处理器的驱动电机和粉碎刀盘为机器的关健部分,直接影响机器的使用效果,所以本设计着重对粉碎刀盘和驱动电机进行设计论述。对于粉碎刀盘和刀片,先对工作载荷进行力学分析,计算流体阻力,进而选择材料及对刀盘、刀片进行强度校核。根据我国食物垃圾的特点,设计采用组合刀盘式粉碎刀。设计中驱动电机的运行特征为时间短,启动频繁,断续工作,其性能直接影响着厨房食物垃圾处理器质量的好坏,本设计采用电机为永磁直流电动机,它的优点是结构简单、体积小、出力大、效率高。此次设计的食物垃圾处理器,避免了目前同类产品完全采用交流电机、选用昂贵材料的做法,使机器的制造和使用成本降低。
关键词:食物;垃圾;刀盘;永磁电机
According to the characters of food garbage, the paper design a new device一kitchen food garbage disposal. For the kitchen food garbage disposal, the motor and cutters are crucial parts, so the paper mainly discusses them.Through analyzing mechanical, the article figures out liquid resistance and liquid pressure; we obtain resistance of trash when it be smashed. because the garbage in our country own different rigid and stickiness, so the cutter is made up by fasten-cutter, swing-cutter and rotation cutters .In this paper, electric machine has features that it star frequency and work intermittence. For it is crucial for the device, so it is important to choose a appropriate motor. Now, we decide to apply permanent magnet direct current motor, the magnetic pole of permanent magnet direct current motor is a permanent magnet material, it is excellent in simple structure: small volume, powerful output and high efficiency.In this paper, Compared to foreign machine, improve crush efficiency through alter the structure of combination cutters, then, decrease the cost .
Key words:food; garbage; cutters; permanent magnet motor
目 录
1 绪论 - 1 -
1.1 厨房食物垃圾处理的紧迫性 - 1 -
1.2 厨房食物垃圾的特征及其危害 - 2 -
1.2.1 厨房食物垃圾的特征 - 2 -
1.2.2 厨房食物垃圾的危害 - 3 -
1.3 食物垃圾处理的方法 - 3 -
1.3.1 卫生填埋 - 3 -
1.3.2 焚烧 - 4 -
1.3.3 堆肥 - 4 -
1.3.4 作牲畜饲料 - 5 -
1.4 食物垃圾处理器的发展及应用现状 - 5 -
1.5 课题目的和研究意义 - 6 -
1.5.1 课题目的 - 6 -
1.5.2 研究的意义 - 6 -
1.6 方案论证 - 7 -
2 厨房食物垃圾处理器的设计 - 9 -
2.1 厨房食物垃圾处理器的可行性分析 - 9 -
2.2 厨房食物垃圾处理器的工作原理及组成 - 10 -
2.2.1 厨房食物垃圾处理器的工作原理 - 10 -
2.2.2 厨房食物垃圾处理器的组成 - 11 -
2.3 粉碎刀盘组合刀具结构设计 - 12 -
2.3.1 刀具基本尺寸的确定 - 12 -
2.3.2 粉碎刀盘的力学分析及材料的选择 - 12 -
2.3.3 粉碎刀盘的强度校核 - 15 -
2.3.4 刀片的强度校核 - 17 -
2.3.5 粉碎刀盘的结构设计 - 18 -
2.4 驱动电机的选择 - 19 -
2.4.1 电动机种类的选择 - 19 -
2.5 其它部分设计 - 21 -
2.6 厨房食物垃圾处理器的装配 - 22 -
3 结论 - 23 -
参 考 文 献 - 25 -
谢 辞 - 27 -


论文文件预览:
共1文件夹,5个文件,文件总大小:4.76MB,压缩后大小:4.30MB

  • 毕业设计-食物垃圾处理器设计
  • rar2D.rar  [1.44MB]
  • jpg旋转 照片 001.jpg  [1.23MB]
  • jpg旋转 照片 002.jpg  [1.01MB]
  • pdf轴承转子试验台测试系统设计及抗干扰措施.pdf  [396.97KB]
  • doc食物垃圾处理器设计.doc  [706.00KB]

查看评论 已有0位网友发表了看法
  • 验证码: